COHLINE Ferrules
low-pressure hose fittings, for pressing the hose and fitting to the hose ends
DN4, Ø 12,5mm, base hole Ø: 7,3mm,
for outer hose Ø from 11,0 - 11,5mm
- Art.-Nr.: 42607739
- Org.-Nr.: 8001.1250
DN6, Ø 15,0mm, base hole Ø: 9,3mm,
for outer hose Ø from 13,5 - 14,0mm
- Art.-Nr.: 42607788
- Org.-Nr.: 8001.1551
DN6, Ø 15,0mm, base hole Ø: 11,2mm,
for outer hose Ø from 13,5 - 14,0mm
- Art.-Nr.: 42607796
- Org.-Nr.: 8001.1500
DN8, Ø 16,0mm, base hole Ø: 11,4mm,
for outer hose Ø from 14,5 - 15,0mm
- Art.-Nr.: 42607804
- Org.-Nr.: 8001.1600
DRESSELHAUS Hose Connector
plastic, connector and reduction nozzle
resistant to E10, fuels and lubricants and acetone and brake fluid
ABS STUTE Fuel Hose
soft PVC, transparent, without fabric insert, flame retardant and self-extinguishing after removal of the flame
Can be used as a fuel hose for small engines and lawn mowers as well as windscreen washer hose (with ethylene glycol addition). The hose is silicone-free and fulfills the requirements of 202/95/EC (RoHS) and the 1907/2006/EC (REACH).
ABS STUTE Vacuum Hose
type C, connecting and vacuum hose, vacuum hose for control purposes in vehicles, fuel hose for two-wheeled vehicles
Technical data: inner tube: NBR compound; color/marking: black/material, dimension; working temperature: constant temperature till 50°C; peak temperature: short-term till 90°C; coldness behavior: till -30°C; working pressure: pressureless; fuel and oil resistance: sufficient
Supplier notice It is the task of the car repair workshop as a qualified motor vehicle repair to check whether the tube regarding the materials and technical data can replace the original parts of the manufacturer.
COHLINE Fuel Hose
DIN 73379 type A (Stand 08/52), without braid, for unpressurized use as a vent hose
SWG hose connector
Plastic, T-connector
Resistant to E10, fuels and lubricants as well as acetone and brake fluid.
ABS STUTE Fuel Hose
type B, E10, vulcanized textile braids, not only suitable for biodiesel and biodiesel additive
connecting and vacuum hose, NBR compound hose core, cotton mesh from CO (cotton), color: black
Technical data: temperature resistant: permanent tepmerature from -35°C to 90°C, short-term peak temperature till 110°C, working pressure: up to 10 bar; burst pressure: according to DIN 53758, tolerancy: according to EN / ISO 1307/97
DRESSELHAUS fuel hose "4706"
PVC, crystal clear, flexible, without fabric insert
Only suitable for small engines, mopeds and lawn mowers.
ABS STUTE Fuel Hose
type 2 A, E10, smooth, with braided textile interlining, according to DIN 73379/ 1997
Pressure tube for the support of containing of lead/unleaded fuels and diesels, but not for biodiesel. Additives of biodiesel or additive of bioethanol (ETBE till max 7 till 10%)
Technical data: inner tube: NBR compound, fuel and oil resistant (nitrile rubber), insert: textile braid (CV/ viscose), outer layer: CR-compound (chloroprene rubber), color/marking: black/label DIN standard, temperature resistance: constant temperature -35 till 90°C, peak temperature: short-term till 110°C; coldness behavior: filled with FAM-test fuel and 180° bending till -35°C, (not for hoses with > 15mm outer diameter), test pressure (tightness): air: 4 bar over 60 seconds, water: 20 bar over 30 till 40 seconds, working pressure: < 10 bar, burst pressure: according to DIN 53758, tolerances: according to EN/ ISO 1307/97
DRESSELHAUS fuel hose "4707"
yarn mesh type B
repair / gasoline hose according to DIN 73379, black, on spool in carton or polybag, various Ø and lengths
Note: Not suitable for biodiesel and rapeseed oil!
