HSS-R, type N, roll-milled, DIN 338, black
Cylindrical, short, right, standard , sharpening angle 118°. Suitable for steel, cast iron alloyed and unalloyed ( lower as 900 N/ mm²), grey and pressure casting, sintered iron, graphite, short-chip aluminium alloys, suitable for brass and bronze

Ø 150mm, hook and loop, 15 holes, basis
for orbital sander, for feather edging, stripping old paint and dry sanding filler. With premium aluminium oxide grain on a durable B-weight latex paper backing, with non-loading No-Fil water-based stearate

Ø 76mm, hook and loop, no holes, for Pro Self-Grip back-up pad
standard disc for eccentric disc system with small diameter, to be used on back-up pad with 76mm diameter, medium (Art. 6.41 65 18/6), heat-treated aluminium oxide grain, fibre-reinforced, tear resistant latex paper, water based No-Fil, no pigment in No-Fil or bond, color coded discs

Ø 76 mm, velcro, unperforated, for backing pads with Ø 76 mm
The new A975 No-Fil SG product has been developed for the most common sanding operations on painted parts, composite materials, gelcoat in shipbuilding, wood and non-ferrous metals. It is suitable for sandering stronger or more resistant surfaces such as ceramic coatings. The combination of SG and heat-treated aluminum oxide enables a very aggressive, cool cut with high wear resistance and a longer service life. The fiber-reinforced latex-treated B-paper provides 50 - 60 % higher tensile strength with great flexibility. The product can therefore be used for dry and wet sanding. In addition, the water-based No-Fil anti-clogging coating prevents premature clogging while extending the service life. Thanks to the use of a special backing, there are no color pigments in the bond or No-Fil coating, which prevents soiling of the workpiece.

HSS-TIN, type N, titanium coating, DIN 338
cylindrical, short, right, sharpened, titanium coating, from Ø 3mm cross-grinding, sharpening angle: 135°. Suitable for steel, cast steel alloyed and unalloyed ( lower as 900 N/mm²), grey and die-cast, sintered iron, graphite, short-chipping aluminum alloys, brass and bronze

HSS-CO, type N, with 5% cobalt, DIN 338
Cylindrical, short, right, polished, tips from 3mm split point, sharpening angle 135°. Suitable for alloyed and unalloyed steels (700 - 1300 N/ mm²),hot and cold work steels, tempering and case-hardening steels and stainless and acid resistant steels

Ø 50mm, for quick-change system TR, self-sharpening grain
for light deburing and blending operations, removal of old paint layers and corrosion in difficult to access area such as sills, wheel housings, trunks. When the grain breaks out, the geometry creates new microtips, which ensure a very high removal rate

115 x 280mm, non-punched, can be used by hand or on orbital sanders
For dry sanding primer, filler and old paint. Plan grinding of polyester filling areas as well as grinding / shaping of fillers. The special anti-setting coating No-Fil prevents premature clogging and extends the life usage

Velcro, 115mm Ø, alumina abrasive grit, for steel and metal alloys, fiber base 0,8 / 0,6mm