PVC hose with fabric ply, working pressure max. 15 bar at 20°C
For normal operating conditions with compressed air, blue

PVC hose with fabric ply, working pressure max. 15 bar at 20°C
Extremely resistant to compressed air containing oil, resistant to ageing by reinforced outer material, very flexible, also at low temperature, grey

spiral hose, polyamide, with rotary quick coupling (only SSL-SK) and plug nipple
Especially suitable for balancers. Bend protection at the spiral hose ends and high reset force, max. pressure: 8 bar, outer Ø: 8mm, inner Ø: 6mm

for air passage till 1100 l/min at 6 bar, pressure difference: 0,5 bar
Eurostandard profile, brass, pollution resistant through tight-fitting release bushing, working pressure max. 35 bar and rough vacuum, with oil resistant perbunan seal

for dowel assembly in pipes with pipe Ø of 18mm
Installation of the compressed pipe through light pressing, with long hole of screw attachment and centering cone on base, countersunk screw head, cold break proof

steel, galvanized, for compressed-air hoses, worm thread for cross profile screws, SW 7mm, band width: 9mm

with male thread, DN 7,2
Standard, brass, without check nipple

spiral hose, polyurethane, with 360° swivel joints on connecting pieces
Inner Ø: 6,35mm, air inlet thread: 12,91mm (1/4"), burst pressure according to DIN: 55,1 bar / 800 PSI, working pressure: 10 bar

with hose nozzle, NW 7,2
Eurostandard profile, material: brass

polyamide hose, largely resistant to oil, grease, acid, salt and leach
For application in measuring and control technology, laboratory and welding technology as well as for smaller compressed air tools and spray guns. Narrow wall thickness yet extremely pressure resistant. For temperature range from -40°C to +80°C, max. pressure 19 bar, corresponds to DIN 73378, blue