set, spring steel, with arbor, shaft Ø 2,35mm, suitable for Micromot systems
For plastic, wood and non-ferrous metal. 0,1mm thick. Industry and dentalquality

steel, 3-jaw, capacity: 0,3 - 3,2mm, suitable for Micromot systems
For all prepared Micromot devices. Advantageous when working with different shafts. Quick change the tools when working with shafts of varying diameters (e.g. HSS drills according to DIN 338)

size 2
Interlock according to DIN, for all gear drill chuck, pin Ø: 6mm

DIN851, EN29454-1
Flux for general soft soldering of copper alloys, not suitable for soldering in electronics!

steel, 7 pieces, for all prepared Micromot devices (beside GG 12), suitable for Micromot systems
The steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, fourslit collets of brass and aluminium)
Content: each 1 x 1,0 - 1,5 - 2,0 - 2,4 - 3,0 - 3,2mm, clamping nut, holder for storage

glue cartridge, suitable for hot glue guns with Ø 11mm

spare tip for Proxxon soldering device LG 12, easy to replace by loosening the clamping screw

electro, 40% tin content
Flux-filled soft solder wire, ISO Core "KOLO" S-Sb60Sn40 according to DIN EN 29453 (early designation L-PbSn40 according to DIN 1707), flux amount: 3,5%, 1.1.1.B according to DIN EN 29454 (early flux designation F-SW 31), for fine soldering, plumbing, telecommunication construction, general soldering work, melting range: 183 - 235°C. The flux is non-conductive and is more strongly activated on a halogen basis!
Note: Fpr professional users only!

longlife soldering tip, suitable for "Multi Sprint" quick soldering gun, straight, chisel shape, 3,2mm wide
Suitable for continuous operation. The soldering tip is galvanically plated with an iron layer in a special process and protected against corrosion and oxidation by an additional chromium layer. Very good heat transfer protects the radiator of the soldering iron from overheating and premature wear. Inner shaft Ø: 6,60mm, outer shaft Ø: 8,50mm, total length: 46mm

Tip: Also suitable for the soldering stations ANANLOG60, ANALOG60A, DIGITAL80, DIGITAL80A, DIGITAL2000A, RDS80, MICRO-CON60, TWIN80A, ELS8000/M/D, MS6000 and MS8000 and the soldering iron Power-Tool, Ergo-Tool, Multi-Pro, Multi-TC und PTC 70.

for metal, 2 pieces
Suitable for Metabo, AEG, Black & Decker, Bosch, DeWalt, Flex, Hitachi, Milwaukee, Porter Cable, Skil. Unbreakable, flexible, thickness: 0,9mm, total length: 150mm, crossed/milled design, material BiM, correspond with Bosch type S 918 BF