DIN851, EN29454-1
Flux for general soft soldering of copper alloys, not suitable for soldering in electronics!

electro, 40% tin content
Flux-filled soft solder wire, ISO Core "KOLO" S-Sb60Sn40 according to DIN EN 29453 (early designation L-PbSn40 according to DIN 1707), flux amount: 3,5%, 1.1.1.B according to DIN EN 29454 (early flux designation F-SW 31), for fine soldering, plumbing, telecommunication construction, general soldering work, melting range: 183 - 235°C. The flux is non-conductive and is more strongly activated on a halogen basis!
Note: Fpr professional users only!

electro tin, 60% tin content
Flux-filled soft solder iwre, ISO Core "RA" S-Sn60Pb40 according to DIN En 29453 (early designation L-PbSn60 according to DIN 1707), fkux amount: 2,5%, 1.1.2.B according to DIN EN 29454 (early flux designation F-SW 26), for fine soldering, plumbing, telecommunication construction, general soldering operations, melting range: 183 - 190°C. The flux is conductively!
Note: Only for professional users!

cutting length: 35cm, groove width: 1,1mm
Chain for saw bars with a length of 35cm, a bar groove width of 1.1mm and a 3/8" pitch. With the double cutting corners on the "Chamfer" - half chisel cutting edges and the 3/8" - pitch, the chain produces a rough cutting pattern, is durable and quite easy to file. Suitable for e.g. Makita chainsaw "EA3200S35A" and "UC3541A".

piezo ignition, working temperature: 1300°C
For rapid heating up e.g. when soldering, shrinking or flambé. With lockable on/off switch and adjustable flame size. Filling with conventional butane gas for the lighters.

soldering torch with gas cartridge, working temperature approx. 700°C
Compact, handy multi-purpose soldering unit with powerful turbo torch for soft soldering, brazing, flame-cutting, burning off, melting and hardening. Flame continuously adjustable, burning capacity with one pressurized gas can approx. 2,5 h, brazing Cu tube up to diameter 22mm, soft soldering up to diameter 28mm, weight: 330g

soft solder and tinning paste, DIN EN 29453
For soldering and tinning of iron, steel, copper and brass, metal content: 60%, liquid content: 40% (flux is acidic), working temperaure L-Pb60Sn40, 40%: 183 - 235°C, working temperature L-Sn60Pb40, 60%: 183 - 190°C
Contains the following acids: zinc chloride lower as 10%, benzenesulfonic acid lower as 10%, ammonium chloride lower as 5%

piezo ignition, till 1750°C, working temperature approx. 730°C, incl. 400ml gas cartridge
Hand burner for tinning, flaming, soft and hard soldering. The high performance special burner (Ø 17mm) bundles the flame, thus saves energy and reduces the work time. With ergonomic handle, adjusting wheel for flame regulation and ignition button.

piezo ignition, overhead valve, working temperature approx. 730°C, without gas cartridge
Blow torch soldering as well as for various brazing and heating, tinning, flaming and melting. By the overhead valve, the blow torch can be tilted forward by 90° directly after start-up or turned 180° upside down. This valve allows overhead work without corresponding preheating time and keeps the prevailing gas pressure constant at the nozzle. Flame infinitely adjustable, the ignition is quick and easy by pressing a button and the stable, ergonomically shaped handle allows safe and comfortable one-hand operation.

for soldering, de-soldering, brazing, heating and tinning
Individually controllable gas and air supply. Super fine flame shape with temperature attaining 1200°C. Ideal for precision work. Fitted with an electronic piezo crystal lighter. Tank capacity: 50ml for approx. 60 minutes operating time with normal flame. For fill-up use standard butane cartridges for lighters