MEN@WORK Accessory
for headlight adjusting device "2066/DG"
HELLA GUTMANN Rail Set
suitable for SEG IV and V, 1,5m
For companies with a high amount of cars passing through, recommended rail travel min. 3m
HELLA GUTMANN Protective Cover
Suitable for HGS headlight beam adjustment device SEG IV and SEG V
High-quality protection against external influences. Quick and easy assembly, one-person operating. Dust, oil and water repellent
SLIFT Accessory
for headlight adjusting device "SEP Comfort"
HELLA GUTMANN Steel Roller Set "Aftermarket"
for adjustable SEG rail system (8.96 55 83/1)
Consisting of 2 prism rollers and 1 smooth roll. The profile of the prism rollers is specially adapted to the corresponding rail. The rollers can also be retrofitted to existing SEG IV / V devices. Each roll weighs approx. 3kg. As a result, the center of gravity of the device shifts down again and ensures a higher tilt stability
MEN@WORK Rail Set
accessory for headlight adjusting device "12240/ D/ L2/ V"
HELLA GUTMANN extension "CSC –Tool"
toolkits and components for calibration system CSC tool digital
wheel sensor SE, for exact positioning of the CSC-Tool SE or CSC-Tool Digital directly in front of the vehicle
- Nº de artículo 89657468
- Org.-Nr.: 8PZ 015 269-131
radar kit I EVO, for calibration of radar sensors at almost any position height
Scope of delivery:
1x system holder
1x angle adjusting plate
- Nº de artículo 89657469
- Org.-Nr.: 8PZ 010 611-981
radarreflector 4-06, for adjustment of radar sensors (lane angle / blind spot assistant) on Audi and Mazda
Scope of delivery:
1x radar reflector CSC 4-06
1X Power supplies
Required:
Radar kit (#8PZ 015 269-051)
Basic Calibration Panel Set VAG / Mercedes (#8PZ 010 611-691)
Addition Profile (#8PZ 010 611-611)
- Nº de artículo 89657470
- Org.-Nr.: 8PZ 015 269-001
magnetic laser, for the adjustment of certain radar sensors
Scope of delivery:
1x magnetic laser
1x cases
- Nº de artículo 89657471
- Org.-Nr.: 8PZ 010 611-321
rear cam kit I basic (profile), for calibrating the ambient camera system and the rear view camera
Scope of delivery:
2x base support profile divided (Basic)
2x sliding carriage for measuring tapes
2x measuring tapes
2x Mounting Screw for Target
VAG-Group Target
Mercedes-Benz Target
- Nº de artículo 89657473
- Org.-Nr.: 8PZ 010 611-601
rear cam kit I basic (calibration chart set), for calibration of the environment camera system and the rear view camera VAG, Mercedes
Scope of delivery:
1x Target VAG 2-01
1x Target Mercedes Benz 2-02
- Nº de artículo 89657474
- Org.-Nr.: 8PZ 010 611-691
rear cam kit I addition (additional profile), for calibrating the ambient camera system and the rear view camera
Scope of delivery:
2x target mounting profile
4x Mounting Screw for Target
2x VAG target
- Nº de artículo 89657475
- Org.-Nr.: 8PZ 010 611-611
rear cam kit I addition (calibration chart set), for calibration of the ambient camera system and the rear view camera VAG
Scope of delivery:
2x Target VAG
- Nº de artículo 89657476
- Org.-Nr.: 8PZ 010 611-681
rear cam kit II side (additional profile and VAG target carpet), for calibrating the ambient camera system and the rear view camera
Scope of delivery:
2x VAG-Target carpet
4x frame profile
- Nº de artículo 89657477
- Org.-Nr.: 8PZ 010 611-621
MAHLE Accessory
for TechPRO Line - digital ADAS functions
Target carpets (2 pcs.) for VAG camera 360° calibration, is combined with the Digital ADAS Easy Placing Kit
- Nº de artículo 89656672
- Org.-Nr.: 1010601610
tablet for VAG rear view camera and 360° camera, is combined with the Digital ADAS Easy Placing Kit
- Nº de artículo 89656680
- Org.-Nr.: 1010601612
tablet for Mercedes rear view camera-tablet kit 2, is combined with the Digital ADAS Easy Placing Kit
- Nº de artículo 89656714
- Org.-Nr.: 1010601614
fir for Mercedes front radar, for models from 2011, in plastic case
- Nº de artículo 89656730
- Org.-Nr.: 1010601615
HELLA GUTMANN Rail Set "SEG-System Aftermarket"
suitable for headlight adjusting device from SEG iV and V
Same unevenness from 20mm till 3000mm length.
Note: The SEG requires separately available steel rollers (cannot be combined with standard plastic rollers)
rail set, taotal length: 3m
consisting of: 2x hexagon profile (1,5m), 2x flat steel (1,5m), incl. mounting material
- Nº de artículo 65581092
- Org.-Nr.: 9XS 861 736-021
extension rail set, total length: 1,5m
consisting of: 1 x hexagon profile, 1x flat steel
- Nº de artículo 65581118
- Org.-Nr.: 9XS 861 736-041
Headlight Adjustment Point "SEP 4800 PKW"
headlight leveling adjustment point for cars and transporters, 4888mm inspection surface
Possibility of compensation for garage floors slope and uneven surfaces or to comply with defined conditions on the headlight adjustment point.
Technical data: Material: S355MC 2x rolled (high-strength steel for cold forming, thermomechanical rolled), 2x 4 plates with 1220mm finished by DIN ISO 2768-mT, each plate is adjustable through threads by DIN 18202 14 x levelling possibilities, allowed axle load: 3,5t, height compensation: standard type till 50 mm, extension till 100mm possible (alignment and under lining on site), single weight: 45,79kg per plate, total weight: 366,32kg (set), drive area: according GUV-R 181 with non-slipping surface R11, coated in RAL 7011 (metal grey)
Note: Meets all requirements of the guideline according to Appendix 4, § 29 StVZO HU headlight test guideline!
plus freight and assembly costs
mounting set for headlight adjustment point "SEP 4800 PKW"
- Nº de artículo 89655930
- Org.-Nr.: BFS4810