non-woven filter bag, 3-ply, tear-resistant, with high dust retention level
The fleece filter bags are specially adapted to the Kärcher wet/dry vacuum cleaners WD 2 Plus, WD 3, WD 3 Battery and KWD 1 to KWD 3 as well as Kärcher washing vacuum cleaners SE 4001 and SE 4002. Particularly suitable for heavy-duty use, for example when sucking in coarse and damp dirt.

one-piece, for wet and dry vacuuming without changing the filter, with a high degree of dust retention
Easy to install and remove by turning without an additional locking part. Suitable for: WD 1 Compact Battery, WD 2, WD 2 Plus, WD 3, WD 3 Battery, KWD 1-3, washing vacuum SE 4001, SE 4002.

1000 W, one-piece cartridge filter, 4m cable, 2m suction hose
17l stainless steel container, fleece filter bag, removable handle, blowing function, pull & push closure system, ergonomically shaped carrying handle, cable and accessory storage directly on the unit
Technical data: 220 / 240 V, nominal width accessories 35mm, suction hose 2m, connection cable 4m, weight without accessories 4,8kg
Scope of delivery: suction hose, detachable handle, 2 suction tubes (0,5m), wet/dry suction nozzle, crevice nozzle, clips, one-piece cartridge filter, 1x fleece filter bag

1500 W, Easy Service concept, stainless steel container
For medium-sized quantities of liquids, coarse dirt and dust. 30 l plastic container, non-woven filters, cartridge filter (PES), crevice nozzle, suction pipe (505 mm, steel), wet/dry floor nozzle (360 mm)
Technical data: Voltage 220 - 240 V, air volume 59 l/s, standard nominal diameter DN-35, cable length 6.5 m, suction hose 2.5 m (with manifold), weight 8.0 kg (without accessories)

with a double filter system for removing ash from the fireplace, oven and grill
Vacuums ash, sand and coarse dirt. With blower function for heating embers or blowing off surfaces, washable HEPA cartridge filter and 20 liter metal dirt container with its own carrying handle. Storage of the supplied nozzles directly on the device. To empty the container, the suction unit can be removed after opening the clip locks.

Technical data:
suction type: dry
air volume: 1500 l/min
tank volume: 20l
tank material: metal
hose diameter: 38mm
sound pressure level: 76 dB(A)
cable length: 3,5m
amount of motor(s): 1
vacuum: 150 mbar
input power: 1,2 kW
supply voltage: 230V
phase(s): 1 Ph
current type: AC
mains frequency: 50 Hz
length: approx. 310mm
width / depth: approx. 310mm
height: approx. 420mm

paper and fleece bags

fleece filter, tear resistant, with reliable fine dust retention
Suitable for Kärcher wet & dry vacuum cleaner series MV 4 to MV 6 and WD 4 to WD 6

manual, max. surface power 2800 m²/h, tandem roller system, working width 700mm, retractable handle
Hand sweeper for residential and commercial use indoors and outdoors.. Two side brushes sweep the debris in front of the tandem rotary brushes, which transport them from above into the debris hopper. For debris of all sizes, from flat lying paper to beverage cans and, thanks to the height-adjustable roller brushes and side brushes, suitable for a wide variety of ground conditions. Rollers and brooms made of polyamide, frame made of fiber-reinforced plastic. Stairway-accessible through rear wheels.

Technical data:
drive: manual
cleaning surface: 500 - 1000 m²
max. arear output: 2800 m²/h
working width with side brushes: 700 mm
amount of side brushes: 2
hopper capacity: 20l
height: approx. 200mm
height: max. 1000mm
length: approx. 680mm
width / depth: approx. 580mm
weight: approx. 10kg

Suitable for parts washers, from perbunan, Ø10 x 2mm

part washing device, pump with 3,3l/min delivery rate, only suitable for non-flammable liquids
For thorough cleaning and degreasing of complex parts before soldering or painting. Through a flexible metal hose the parts are specifically cleaned. Input power: 0,026 kW, supply voltage: 230 V, mains frequency: 50 Hz, connecting cable length: 1,5m