with suction cup, for grinding the valve seats in the cylinder head

1/4", TORX®, for EGR valve screw connections on BMW and Mini, for manual operation
For operating the EGR valve screw connection on diesel engines. Long, thin blade for areas with difficult access - you no longer need to put different tools. Drive: square 6,3mm (1/4"), output: Tamper resistant TORX® profile, with knurling, length: 213mm, diameter: 12mm

sutitable for:
N47, N57, B37, B47, B57

short design, 2-components handle with hanging hole, length: 130mm, 4 pieces
For insertng and removing O-rings or seals and for removing the protection caps on wheel bolts.

Consisting of: 1x straight point, 1x 90° point, 1x hook point, 1x piercing awl

for VAG, V6/ V8 fuel and diesel engines
Suitable for: Audi: A4, A6, S6, A8, S8; VW: Passat, Phaeton, Touareg; Skoda: Superb

engine code: AAH, ABC, ACZ, AEJ, AFC, AGA, AJG, ALF, ALW, AML, AMM, APC, APS, APZ, ARJ, ARN, ASM, BDV, AGB, AJK, ASJ, ARE, AZA, AZB, AZR, BES, ACK, AGE, ALG, AMX, APR, AQD, ATX, BBG AFM ,ABZ, AKC, ANK, AQF, AQG, AQJ, ARS, ARU, ASG, AUW, AVN, AWN, AXQ, BFL, BGH, BGJ, BHX

for fitting and removing the water pump stretch belt on Citroen / Peugeot / Opel, Toyota
This tool is suitable for damage-free fitting of the belt over the water pump pulley on 1.0 Vti and 1.2 L PureTech/Vti/THP 3-cylinder petrol engines from model year 2012. It is essential for water pumps with plastic pulleys.

suitable for: Peugeot 108, 208, 301, 308, 2008, 3008, 3008 II, 5008 and 5008 II, Citroen Berlingo III / IV, C1 II, C3 III / IV / Aircross / Picasso, C4 II / Cactus / Picasso / Grand Picasso II / SpaceTourer / Grand SpaceTourer, C5 Aircross and C-Elysee, DS 3, 3 II, 3 Cabrio, 3 Crossback, 4, 4 II, 4 Crossback and 7 Crossback, Opel Astra L, Combo (X19), Corsa F, Crossland, Crossland X, Grandland X and Mokka, Toyota Aygo and Proace City

Motorcodes: 03S, B12XE, B12XHL, B12XHT, D12XE, D12XHL, D12XHT, EB0, EB0F, EB2, EB2ADT, EB2ADTD, EB2ADTDS, EB2ADTS, EB2ADTX, EB2DT, EB2DTM, EB2DTS, EB2DTSM, EB2F, EB2FA, EB2FAD, EB2FB, EB2M, F12XE, F12XHL, F12XHT, HMH, HMM, HMP, HMR, HMT, HMV, HMW, HMX, HMY, HMZ, HNE, HNK, HNN, HNP, HNS, HNV, HNW, HNY, HNZ, LEG, LES, LEZ, ZMZ

bent double box-end wrench (12-point), slotted on sides, VAG
For safe operation of control bar screw connection (loosening, adjusting, tightening) when removing or installing the pressurized can with position sensor for boost pressure plate on the turbocharger. Enables working on built-in components. For 2.0l common rail engines (4-cyl. diesel engine) from Audi, VW, Skoda and Seat. Can be used in combination with HAZET socket 2561-10 (6.24 66 76/8)

suitable for:
AUDI: A3 from MY 2004, TT MY 2008 - 2014,
VW: Golf from MY 2009, Golf Plus from MY 2009, Eos from MY 2006, Jetta from MY 2006, Passat from MY 2006, Passat CC from MY 2009, Beetle from MY 2011, Scirocco from MY 2009, Tiguan from MY 2008, Transporter from MY 2010
SKODA: Octavia MY 2006 - 2013, Superb MY 2009 - 2015, Yeti from MY 2009
SEAT: Altea from MY 2006, Leon MY 2006 - 2012, Toledo MY 2006 - 2009
engine code diesel: CAAA, CAAB, CAAD, CAAE, CCHB, CAAC, CFFD, CBDC, CLCA, CLJA, CBAA, CFFA, CJAA, CBAB, CTHC, CFFB, CFJA, CBBB, CBAC, CFGA, CRBC, CRLB, CBBA, CBDA, CBDA, CEGA, BKP, BMA, BMR, BKD, AZ

for maintaining and cleaning cylinders, bearing shells, boreholes, tubes, etc.
Special steel, with exchangeable, self-spreading and re-tensioning honing arms, as well as a flexible drive shaft for pneumatic machines or electric drills.

for BMW HP pump sprocket
for dismounting the chain sprocket from the HP pump, for dismounting of HP injection pump wheel
Suitable for: BMW series 1- (E81/ E82/ E87/ E88/ F20), 3- (E90/ E91/ E92/ E93/ F30), 5- (E60/ E61/ F10/ F11), X1 (E84), X3 (E83/ F25) with engine code: N47 and N47S

for PSG glow plug
An indispensable tool for the professional and damage-free removal and installation of PSG glow plugs (with integrated pressure sensor). The socket is provided with a retaining rubber to prevent the PSG glow plug from dropping.
Attention: When removing and installing PSG glow plugs, protective caps must always be used in order to protect the plug connector against dirt and electrostatic charging. These caps can be ordered separately as accessories (protective cap set - KL-0369-9007-10)

Suitable for: VW-Audi, Seat, Skoda and Opel Common-Rail diesel engines with PSG-spark plugs (BERU PSG001, PSG002, PSG004). Built-in in e.g. Audi A1 (8X), A3 (8V), A4 (8K), A5 (8T, 8F), A6 (4G), A7 (4G), A8 (4H), Q3 (8U), Q7 (4L); VW Beetle (5C), Golf Sportsvan (AM), Golf VI (5K, AJ), Golf VII (5G, BE, BA), Jetta III (1K), Jetta IV (162), Passat (3G), Polo (6R, 6C), Scirocco (137, 138), Touareg (7L), Touareg (7P), XL1; Seat Leon (5F); Skoda Fabia III (NJ), Octavia III (5E); Opel Insignia (G06), Astra J (P10)

for installing and removing rubber retainers of the exhaust systems
With T-handle, half-round, 20° offset, special steel, chromed surface, suitable for e.g. VW, Audi, Mercedes Benz (beside 190er type 201), Opel, Japanese cars etc.