matt chromed, with 2-component handle

with gripping zones for flat and round material, cutting edges for soft and hard wire and long cutting edges for thicker cables, polished head, handles with multi-component sleeves, cutting values (Ø): middle hard wire 3,1mm, hard wire 2,0mm, Cu-cable, multi-wire 10,0mm or 16,0mm²

according to DIN ISO 5748, long cutting edges
special tool steel, matt chromed, 2-component handles (red/black), induction hardened precision cutting edges, also suitable for wire with 1,6mm diameter

35% less effort required than with conventional combination pliers, cutting edge hardness approx. 63 HRC
With gripping zones for flat and round material, long edges for thicker cables and optimized translation for lighter work. Special tool steel in special quality, forged, multi-stage oiled

needle nose design, handy use when working in confined areas
Slim head design and pointed jaws (anti-twist). Gripping surfaces with special convex contour on one side (for secure gripping of flat parts). Milled groove in the gripping area (permits small parts such as nails, pins and bolts to be held and pulled). Easy cutting thanks to the high leverage joint. With cutting edges for soft, medium-hard and hard wire.Forged from special high grade tool steel, manifold oil-hardened

front grip and side grip function, for Ø and SW 4 - 22mm
The pliers are suitable for gripping, tightening and loosening screws with worn heads and drives. It has a five-way adjustable sliding joint with push-button adjustment for precise adjustment of the gripping width. With push-through tong joint, clamping protection and three-point contact for frontal gripping of flat workpieces. Forged from chrome-vanadium electric steel, oil-hardened, teeth additionally induction-hardened to approx. 61 HRC, black atramentized, head polished, dimensions: 200 x 51 x 22mm, weight: 280g

for gripping and cutting of wires, DIN ISO 5746 induction hardened cutting edges with grind, cutting edge hardness: 60 HRC, polished surface, ergonomic 2-component plastic handle covers (blue/black)

multifunction pliers for electrical installation, 6 functions in one pliers
To grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves. Cutting capacity CU-cable, multi wire: Ø 15mm/50mm², stripping capacity for cross-section: 0,7 - 1,5 + 2,5mm², capacity: 0,5 - 2,5mm², insulated with multi-component covers, length: 200mm

Features: Smooth surfaces near the tips grip single cores without damaging them. Serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors 0,7 - 1,5mm² and 2,5mm². Crimp die for wire-end ferrules 0,5 - 2,5mm². Cable shears with precision cutting (induction hardened) for copper and aluminium cables up to 5 x 2,5mm² / Ø 15mm. Slim design, bolted joint, precise, zero backlash operation of pliers.