1/2", 52 teeth, reverse feature directly on ratchet mechanism
Quick release button for releasing sockets instantly. head and shaft forged from one piece (CrV steel, 2x nickel-plated), handle oil and acid resistant TPR (thermoplastic rubber) with useful hanging hole

1/2", fine toothed, 72 teeth, head and shaft forged from one piece
Reverse lever for ratcheting direction, quick release button for releasing sockets instantly, CrV, 2x nickel-plated, handle from oil and acid resistant TPR (thermoplastic rubber) with hole for hanging up

1/2", fine toothed with 72 teeth, 5° actuation angle, with locking and release mechanism, with curved shaft to protect against injury, plastic coating, DIN 3122 / ISO 3315. Material: hardened steel

1/2", 60 teeth, joint with ratchet mechanism, knurled ring
For effortless loosening of tightly locked screws. From CrV steel, matt chromed. Handle from oil and acid resistant TPR (thermoplastic rubber)

1/2", fine-toothed with 36 teeth, with insert lock and release mechanism. Material: hardened steel

1/2", fine toothed, 52 teeth, with offset screwdriver function
The perfect tool when space is a problem e.g. at heating and cooling systems, servomotors, exhaust systems and auto gearboxes. With inner square (1/4") in handle to attach e.g. an extension. Release of the application tools via pressure button

Manufacturer note: The handle can be preloaded on one side till stop by turning the handle. A few millimeters are enough to loosen and tighten.

1/2", fine-toothed, 72 teeth, with socket locking mechanism
With bent shaft to protect from injury, chrome-vanadium, 2-component handle

1/2", 72 teeth, telescopic extension adjustable in 6 positions, with quick release, chrome-vanadium steel

1/2", 360° rotary handle, fine toothed with 72 teeth, opening angle: 5°
Actuator mechanism in the handle for use in areas with restricted access. With sliding square for right and left operation. Standard operation possible through locking function

1/2", fine toothed, 72 teeth, slim head
Square drive according to DIN 3120/ ISO 1174 with ball reception, reversible, 710Nm (max. load), with ejection mechanism on the ratchet head, ergonomic 2-component handle with soft zone, high gloss chromed, chrome-vanadium