CONDOR Adapter Set "206"
enlarging and reducing adapters, 1/4" - 3/4" drive, 6 pieces, for manual operation, chrome-vanadium steel, matt finish, square drive
CONDOR adapter set "xcess performance"
magnification and reduction adapters, 1/4" - 3/4" drive, 8 pieces, for hand operating, chrome-vanadium steel, satin matt, square drive
consisting of:
1/4" drive - adapter for 1/4" inside x 3/8" outside
3/8" drive - adapter for 3/8" inside x 1/4" outside
3/8" drive - adapter for 3/8" inside x 1/2" outside
1/2" drive - adapter for 1/2" inside x 3/8" outside
1/2" drive - adapter for 1/2" inside x 3/4" outside
1/4" drive - adapter for 1/4" bits
3/8" drive - adapter for 8mm bits
1/2" drive - adapter for 10mm bits
HAZET module insert "163"
Safety-Insert-System (SIS), equipped, different sizes and tools, suitable for all HAZET tool trolleys "Assistent" with drawers
"163-570/24", 1/3 fitting insert, incl. 1/2" sockets, 24 pcs.
consisting of: impact, machine screwdriver socket set, square 12.5mm (1/2"), outer double hexagon traction profile, inner hexagon profile, inner multi-tooth profile XZN (SW 19 - 36mm)
- Nº de artículo 621108A2
- Org.-Nr.: 163-570/24
"163-98/17", 2/3 fitting form insert, incl. combination wrench set, 17 pcs.
outer double hexagonal traction profile, SW from 6 - 24
long slim design, slim heads, ring spanner head angled 15°, shank with extra stable double T-profile, DIN 3113 Form A, ISO 3318, ISO 7738
consisting of: SW 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24
- Nº de artículo 60034212
- Org.-Nr.: 163-98/17
"163-265/6N", 1/3 fit insert, incl. Screw Driver Sets, 6 pcs.
Consisting of: Cross recess profile PH, slotted profile, width across flats: ∙ 0.5 x 3 - 1.2 x 6.5 ∙ PH1 - PH2
- Nº de artículo 89627131
- Org.-Nr.: 163-265/6N
VIGOR Adapter Set
for hand operating, 6 pieces
Drive: squre 6,3mm (1/4"), square 10mm (3/8"), square 12,5mm (1/2"), square 20mm (3/4")
consisting of:
1x outside square 1/4" to inside square 3/8"
1x outside square 3/8" to inside square 1/4"
1x outside square 3/8" to inside square 1/2"
1x outside square 1/2" to inside square 3/8"
1x outside square 1/2" to inside square 3/4"
1x outside square 3/4" to inside square 1/2"
VIGOR Socket Spanner Set "V5505"
impact wrench joint, 1/4", 3/8", 1/2", with 25° swivel angle, 3 pieces
For work in hard-to-reach places, as well as for bypassing interfering edges. With hole for locking pin or locking spring and groove for O-ring. Machine actuation, drive square solid, drive square hollow.
PROXXON TX Socket Set 1/4" + 1/2"
1/4" + 1/2", for TX and inside hexagon screws
Special set made of chrome-vanadium steel, 31 CrV 3 forged. With higher values ??for hardness and maximum torque than required by DIN / ISOt. The dimensional accuracy is within the permitted tolerances. With permanently well readable mark for all key widths
18 pieces, in powder coated steel case
1/4" square drive (6,3mm) and tightening torque till 25 Nm: (size 2 - 6mm) and 1/2" square drive (12,5mm) and tightening torque from 25 - 210 Nm: (size 6 - 14mm - short version 55mm and size 5 - 12 - long version 100mm)
- Nº de artículo 89680557
- Org.-Nr.: 23100
24 pieces, in powder coated steel case
1/4'' drive (6,3mm) from size TX 8 to TX 30 (with front hole) and outsode Torx size E 4 to E 8 (all tightening torque till 10 Nm).
1/2'' drive (12,5mm) size TX 40 - 60 and outside Torx E 10 to E 18 (for tightening torque from 25 - 135 Nm). Three angled wrenches TX 6, 8 and 10
- Nº de artículo 89680565
- Org.-Nr.: 23102
PROXXON Special Socket Set
1/4" + 1/2" special, with inserts, 20 pieces
Consisting of:
1/4"-square drive (6,3mm), (for torques under 25Nm): hexagon sockets for 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 and 12mm
1/2"-square drive (12,5mm), (for torques over 25Nm): 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24mm
KS-TOOLS extension set
1/4"+3/8"+1/2", square drive / inside square
for hand operating, chrom-vanadium, matt finish, with ball lock and ball reception, DIN 3120/ ISO 1174
lengths
1/4": 50 - 100 - 250mm
3/8": 45 - 75 - 150 - 200mm
1/2": 125 - 250mm
KS-TOOLS Adapter Set
enlargement and reducing adapter, DIN 3123 / ISO 3316, in plastic cassette
For hand operating, chrome-vanadium, matt finish, square drive according to DIN 3120 / ISO 1174 with ball lock, inside square according to DIN 3120 / ISO 1174 with ball reception
7 pieces
consisting of:
1x 1/4" auto slimlock quick-change bit holder, 65mm
1x 1/2" reducing adapter, 1/2"F x 3/8"M
1x 1/2" enlargement adapter, 1/2"F x 3/4"M
1x 1/4" enlargement adapter, 1/4"F x 3/8"M
1x reducing adapter3/4"F x 1/2"M
1x 3/8" enlargement adapter, 3/8"F x 1/2"M
1x 3/8" reducing adapter, 3/8"F x 1/4"M
- Nº de artículo 60186822
- Org.-Nr.: 917.0707
PROXXON Socket Set
1/4" + 1/2", for all important vehicle screws, 27 pieces
Consisting of:
With spark plug sockets (16 and 21mm), sockets from 6-32mm and standard ratchets in 1/4" and 1/2" (other content see picture). Ratchet from CrV steel in one piece, hardened and with 52 teeth and quick release mechanism (releasing sockets at the push of the button). Sttel box with distortion-free, indestructible trays of injected polypropylene. Oil and acid resistant and easy to clean. With easy-to-read and durable marking of all socket sizes
