analog, measuring range: 0 till 150mm, vernier 1/20mm for outside and inside with depth gauge

digital, measuring range from 0 till 150mm
for exterior, interior, steps and depth measuring, measuring bar in mm and inch, with thread table, stainless steel

2m, wooden
ten dividers, outside visible joints with spring fittings, two sided mm divisions on the upper and lower edge, large decimal scale, black scale division, measuring accuracy according to EC-accuracy class III

2m, with adjuster
belt clip, with integrated slide control, special hook (end of blade) for interior and exterior measurements, shock absorbing 2-component housing, blade is automatically pulled in, tough coating, double measurement markings (on upper and lower edges)

2m, ABS-plastic
10 dividers, special joint connection, two sided mm divisions on the upper and lower edge, large decimal scale, black scale division, measuring accuracy according to EG-accuracy class III

digital, measuring range: 0 till 150mm (0 - 6 inch)
For outdoor, indoor, step and depth measurements, adjustable 0 position, with depth gauge, metric / inch, accuracy: 0,03mm / 0,001 inch

measuring range: 0 - 60mm, for measuring wear on the brake disc, nonius 1/10mm

0,05 - 1,0mm, valve gauge, steel case with thumbscrew, in bag, blade length: 100mm

3m, with locking device
yellow painted steel strip, tape width: 16mm, with belt clip, mm division on the upper and lower edge, black scale division, red marking decimal, automatic tape returns, plastic tape guide, loop, measuring accuracy according to EC-accuracy class II, weathering spring band steel, ABS 2-component plastic housing

digital, measuring range: 0 to 150mm
for external, internal, step and depth measurements, according to DIN 862, with adjusting screw and fine rolling adjustment, black scale division, measuring bar in mm and inch division and switching, thread table, reset (to zero) in every position possible, large LCD-display (figure height 10,0mm, automatic switch-off, hardened, stainless steel