mini gun, filling capacity: 80g, for loose grease
Precise lubrication of striking mechanisms, spindles etc. Creates pressure up to 1000 PSI / 69 bar, incl. lubricating nipple in 50° and 90° version.

H1, A-straight, hexagon version (SK)
steel, blue zinc-plated surface, hardened, 180°, according to DIN 71412

for grease guns

HHFP, standard, capacity: 500cm³, according to DIN 1283
for greases up to NLGI 2 at 20°C of 400g grease cartridge (DIN 1284) or bulk grease. zinc die-casting (Z 410) grease gun head, bulk locking cap, grease pressure connection at pressure side: M10 x 1, Ø of grease piston: 8mm, delivery rate / stroke: 1,2cm³ at 400 bar counter-pressure

with thread, round head nipple H1 / straight
DIN/ISO 71412, galv. zinc plated

do-it-yourself oiler, HDPE (polyethylene of high density) container, aluminium spout (angled), color: white, transparent
Single-acting plastic pump, which enables drip feed. All valves are ball valve type (pump with 2 ball valves), spout length: 105mm, volume per stroke pump: 1ml/stroke, material of pump: polyethylene

hand lever plunger pump for diesel, heating oil and lubricating oil
Till max. 150mm²/s, telescopic suction pipe for 50 - 200l barrels, connection thread 2" NBR-seal, drainage elbow, approx. 0,3l/stroke

suitable as laboratory / dosing bottle and for filling car batteries
oil, acis and fuel resistant, transparent reservoir, with angled spray pipe

workshop oiler, HDPE (polyethylene of high density) container, aluminium spout (angled), color: white, transparent
Ball bearing mounted and gravity controlled suction tub, enables containers to be almost completely emptied. The pump (single- or double-acting) enables dripp feed, all valves are ball valve type, sealing mechanism with drip collector pan, spout length: 165mm, pump: 1ml/stroke, material of pump: brass and zinc