crocodile clamp, for testers, current till 5A, length: 49 mm², cable cross-section till 4mm²

Ø 50mm with special adapter, outlet 8/6,4mm for motorcycle batteries

battery cell filler, bottle top, rubber, with Auslauftülle
For filling of destilled water and battery acids, also in difficult to reach areas. The outflow is interrupted by closing the air hole with the index finger.

steel, chromated blue, partly insulated
Cross section till 10mm², loadable till 40A, 82mm long

steel, chromated blue, partly insulated
Cross section till 35mm², loadable till 120A, 180mm long

accessory for battery tester "S 500 D"

Clever 2 in 1 design, the M6 eyelets can be securely clamped into a crocodile clamps.
Provides a quick connection for charging and a permanent charging line via the SAE connector on an OXFORD Oximiser Pro battery charger.

battery hydrometer, measuring range from 1,10 to 1,30 g/ml, length: 305mm
Plastic cylinder with large glass hydrometer, low intake volume, fast reading by wide spread scale, no oscillation or lateral application of the hydrometer over centric guide

steel, insulated, with cast insert
Cross section till 35mm², current till 300A, length: 170mm

Allows the battery status to be displayed and determined using a traffic light system.
Green: strong = >12.6 V, yellow: charging = 12.2 V - 12.6 V, red: weak = <12.2 V
Turns signal every 5 seconds to reduce power consumption. For use with 12 V batteries (no lithium batteries).