crocodile clamp, for testers, current till 5A, length: 49 mm², cable cross-section till 4mm²

for battery tester "CrankPrint"

accessory for battery tester "S 500 D"

For dry batteries
Test cell sizes: AA (Mignon), AAA (Micro), C (Baby), D (Mono), 9 V (Block), and other round and Coin Cells. Automatic switch-off after 30 seconds, incl. 2 operating batteries V13GA (LR44).

Digital voltmeter with two-sided SAE connection. A battery charger with SAE connection can also be connected to the second side for voltage testers. The additional charging symbol "CHARGING" is then displayed next to the charging voltage. The scope of delivery includes two fully insulated crocodile clamps with SAE plugs, ideal for connecting to small and large motorcycle and car battery terminals.

for 12V batteries, with 15A fuse
For a permanent check of the charge state of batteries. Can be firmly connected to the battery. Display of the charging state via the LED indicator function.
red: The battery voltage is below 12,4 V.
yellow: The battery voltage is between 12,4 and 12,65 V.
green: The battery voltage is above 12,65 V.

Suitable for: XS 0.8, MXS 3.8, MXS 5.0, MXS 7.0, MXS 10

crocodile clips with and without isolation, 28 pieces
for hobby and workshop, for almost all vehicles
Content: 10x mini 50mm, 6x 65mm, 2x 80mm, 2x 70mm, 6x 55mm, 2x 60mm

user-friendly all-in-one state of charge tester for 12 V AGM, STD & gel batteries
Displays the static charging voltage in volts and the percentage state of charge. Active charging voltage up to 15 V of the vehicle charging system or the connected battery charger. Flashing display when battery is discharged. 2-pin SAE connection according to industry standard. Incl. crocodile clips (cable length 100cm).

for 12V batteries, incl. crocodile clamp (cable length: 100cm)

digital, 12V, 30 - 180Ah
For checking the generator, starter and service voltage over automatic test running