for high frequency chargers with central plug Comfort Connect, 12V
Suitable for: XC 0.8, XS 0.8, MXS 3.8, MXS 5.0, MXS 5.0 Test & Charge, MXS 5.0 Polar, Lithium XS, MXS 7.0 and MXS 10

for RNUSmartCharge chargers, 12V, with integrated voltage indicator

charging current up to 0,8 A, suitable for all 12 V standard, AGM, MTF, gel and 12 V lithium iron phosphate batteries (LiFePO4), battery capacity from 3,5 Ah to 20 Ah, easy-to-read LCD display
The intelligent 7-stage fully automatic battery-saving battery reset, charge, test and maintenance unit ensures that every battery is correctly and safely charged to its optimum voltage before switching to maintenance mode, which extends the service life of the battery.
The soft-start charging mode improves the recovery of deeply discharged batteries.
The impact and fire resistant ABS housing of the Oximiser Pro is suitable for use in any environment and is ultrasonically sealed. The scope of delivery includes crocodile clips, eyelet cable and a hook for hanging.
7-stage battery management system:
Polarity check: Checks whether the battery cables are connected correctly.
Battery analysis: Analyses the battery and determines the best charging method.
Soft-start charging: Controlled build-up of the charging current so that discharged batteries are charged safely.
Bulk fast charging: Fast charging to bring the battery to approx. 85% capacity.
Absorption charging: Reduces the charging speed and provides a top-up charge to ensure the battery is 100% charged.
Voltage check: Hourly voltage check to assess the battery condition.
Maintenance mode: Automatically performs an appropriate charge when the voltage falls outside the permissible limit to ensure that the battery voltage and condition remain perfect.

12 V / 4,5 W, for charge retention of 12 V lead-acid batteries
The solar panel maintains the charge and extends the life of the battery during prolonged periods of non-use. By means of suction cups it can be attached to the windshield or other windows of the vehicle. The included cables allow it to be connected directly to the battery or via the cigarette lighter socket to prevent battery discharge during extended periods of non-use. It is suitable for boats, ships, caravans, quads, small vehicles, cars and motorcycles. It also works in low light and overcast conditions.

Note: It is not intended for continuous operation and must be disconnected before starting the engine or charging the battery.

use / connection:
1. Place the panel so that the sunlight is at its maximum. For example, on the front or rear window of a car and attach it using the four suction cups provided.
2. Connect the clamps or the 12 V DC plug of the interchangeable connection cable (total length 2.8 m) to the panel and then to the battery or the socket of the cigarette lighter.
3. Charging starts as soon as the panel catches enough sunlight.

charging current up to 1.3 A, suitable for all 6 V + 12 V standard, AGM, MTF, gel and 12 V lithium iron phosphate batteries (LiFePO4), battery capacity from 3.5 Ah to 40 Ah, easy-to-read LCD display
The intelligent 8-stage fully automatic battery-saving battery reset, charge, test and maintenance unit ensures that every battery is correctly and safely charged to its optimum voltage before switching to maintenance mode, which extends the service life of the battery.
The soft-start charging mode improves the recovery of deeply discharged batteries.
The impact and fire resistant ABS housing of the Oximiser Pro is suitable for use in any environment and is ultrasonically sealed. The scope of delivery includes crocodile clips, eyelet cable and a hook for hanging.
8-stage battery management system:
Polarity check: Checks whether the battery cables are connected correctly.
Battery analysis: Analyses the battery and determines the best charging method.
Soft-start charging: Controlled build-up of the charging current so that discharged batteries are charged safely.
Bulk fast charging: Fast charging to bring the battery to approx. 85% capacity.
Absorption charging: Reduces the charging speed and provides a top-up charge to ensure the battery is 100% charged.
Voltage check: Hourly voltage check to assess the battery condition.
Battery status indicator: LED lights indicate a low or strong battery.
Maintenance mode: Automatically performs an appropriate charge when the voltage falls outside the permissible limit to ensure that the battery voltage and condition remain perfect.

6-stage, fully automatic battery rescue, charging, testing and maintenance device, charging current 4A, suitable for 12V standard, AGM, EFB (with start / stop systems) and gel batteries, battery capacity 15 Ah - 192 Ah
Recognizes the difference between a discharged battery that needs charging and a sulfated battery that needs salvaging. Adjusts current to any battery size or condition, properly prepares new batteries for first use, and optimizes battery performance. With automatic shutdown in case of short circuit or disconnected battery. Weatherproof housing with wall bracket, can be used indoors and outdoors. With crocodile clips, plug-in contact cable for built-in batteries.

8-stage, fully automatic battery rescue, charging, testing and maintenance device for all 6V and 12V standard, AGM, gel and deep cycle batteries, charging current for 6V batteries 4A, for 12V batteries 3A, battery capacity for 6V 3 Ah - 160 Ah, for 12V 3 Ah - 120 Ah
Automatically selects the proper charging voltage (for a 6V battery in any state or a healthy 12V battery) and then proceeds with charging. A manual bypass for 12V batteries with very low voltage is available. The charging current is regulated according to the size and condition of the connected battery. Automatic shutdown in case of short circuit or disconnected battery. Weatherproof housing with wall bracket, can be used indoors and outdoors. With crocodile clips, plug-in contact cable for built-in batteries.

for 6 and 12V lead-acid batteries up to max. 70 Ah (trickle chagring up to 130 Ah)
Microprocessor controlled automatic charger for e.g. city cars, motorcycles, jet skis, etc. Can stay connected to the battery during winter storage. With four charging modes, LCD screen, automatic shutdown with disconnected battery, anti-spark system and protection against short circuit, reverse polarity and overvoltage

Charging modes:
"SLOW": protects batteries ( < 15 Ah) when charging
"FAST": for many 12 V batteries
"COLD CHARGE": special charging mode in cold weather (under 5° C) and for Start&Stop batteries (AGM)
"6 V": special for 6 V batteries in collectors vehicles (cars/motorcycles)
Technical data:
6 V: from 8 Ah - 70 Ah, trickle charging up to 130 Ah
12 V: from 2 Ah - 70 Ah, trickle charging up to 130 Ah

charging current up to 2,0 A, suitable for all 12 V standard, AGM, MTF, gel and 12 V lithium iron phosphate batteries (LiFePO4), battery capacity from 8 Ah to 80 Ah, easy-to-read LCD display
The intelligent 8-stage fully automatic battery-saving battery reset, charge, test and maintenance unit ensures that every battery is correctly and safely charged to its optimum voltage before switching to maintenance mode, which extends the service life of the battery.
The soft-start charging mode improves the recovery of deeply discharged batteries.
The impact and fire resistant ABS housing of the Oximiser Pro is suitable for use in any environment and is ultrasonically sealed. The scope of delivery includes crocodile clips, eyelet cable and a hook for hanging.
8-stage battery management system:
Polarity check: Checks whether the battery cables are connected correctly.
Battery analysis: Analyses the battery and determines the best charging method.
Soft-start charging: Controlled build-up of the charging current so that discharged batteries are charged safely.
Bulk fast charging: Fast charging to bring the battery to approx. 85% capacity.
Absorption charging: Reduces the charging speed and provides a top-up charge to ensure the battery is 100% charged.
Voltage check: Hourly voltage check to assess the battery condition.
Battery status indicator: LED lights indicate a low or strong battery.
Maintenance mode: Automatically performs an appropriate charge when the voltage falls outside the permissible limit to ensure that the battery voltage and condition remain perfect.

6 - 12 V, 230 V, charging current 10 A, capacity 15 - 120 Ah
sheet steel housing with handle, ammeter for current indication during charging, with overcharge and short circuit protection, 15 Amp plug-in fuse, dimensions: 22 x 17,5 x 16,5cm