- Aire libre y deportivas
- Bicicletas
- Consumibles/suministros de taller
- Herramientas/accesorios de taller
- Aire comprimido
- Dispositivos portátiles
- Equipos de taller
- Herramientas especiales para bicicletas
- Herramientas especiales para motocicletas
- Herramientas especiales para vehículos de motor
- Herramientas manuales
- Herramientas y dispositivos de alquiler
- Ingeniería de medición/prueba
- Lubricantes
- Mantenimiento de batería
- Productos de taller
- Servicio de estación de combustible/neumático
- Marcas
- Marketing de Hartje
- Piezas de automóviles
- Piezas de bicicletas
- Piezas de motocicletas y escúteres
SCANGRIP adapter "Connector"
for use with 18 V batteries with Conect work lights, incl. battery safety system
For each electric brand, such as Milwaukee, Dewalt or Makita, a separate, tailor-made adapter has been developed to fit 18 V battery packs. The adapter is mounted on the work light and then the corresponding battery can be connected. The safety system has automatic discharge protection, overload protection and temperature monitoring.
Manufacturer's note: The Scangrip connectors are tested by TÜV Rheinland. Each adapter / connector is sold under a separate part number and is individually designed for each power tool brand.
AS SCHWABE Work Light "CHIP LED"
cabled, LED, 4000K, neutral white
For the mobile application, protection class IP65, according to DIN EN 60598-1. With special developed original Samsung-SMD-LED, beam angle 120°. Reinforced aluminium die-casting housing, with guard and replaceable safety glass. Stable frame with plastic handle, rubber hose line H05RN-F 3G1,0 with safety plug. Over 90% less energy consumption than halogen lamps, very low heat generation, dustproof, hose waterproof and suitable for permanent outdoor use
PHILIPS worklight "Xperion 6000"
cordless, LED projection lamp, up to 1000 lm, different versions
The two most commonly used lights in one lamp. A homogeneous wide angle flood light for working in large areas for long periods of time and a focused beam that concentrates the illumination on small areas to get the best contrast and brightness, ideal for detailed inspections and tight spaces. Smart zoom control for easy light control, shockproof, waterproof and solvent resistant (IP65/IK07), handle can be used as a support to set up the projector, as a hook for hanging, screwed onto a tripod or attached to a metal surface via the built-in magnet.
"Flood Audio", 1000 lm / 250 lm spot, with motion sensor and Bluetooth speaker
- Art.-Nr.: 65823676
- Org.-Nr.: X60FLAUXI
SCANGRIP power supply "Power Supply Connect"
240 V, cable length: 5m, plug type F (Schuko plug)
With this power supply, Scangrip's battery work lights can be converted into a cable model and permanently connected to the power supply. Cable: 2 x 0.75mm / 2 H05RN-F, power consumption max.: 90 W, rated voltage: 100 - 240 V / AC - 50 / 60 Hz, compatibility (CAS): 12 V - 18 V SCANGRIP CONNECT work lights
SCANGRIP work light "NOVA R"
cordless, COB-LED, 5-stage dimmable, up to 2000 lm
Universal light with handle / adjustable foot (incl. 2 pre-mounted magnets), flexible support and integrated Powerbank with USB socket for charging mobile units.
Technical data: power supply: 3,7V / 4000 mAh Li-ion, battery life: 20 hrs., using time: 5 hrs., protection type: IP67, shock resistance class: IK07, shock resistance: 1m, beam angle: 110°, cable: 1m USB cable, weight: 790g, temperature range: -10°C - +40°C
SCANGRIP Work Light "Sound LED S"
battery, 3,7V / 5200 mAh, with built-in speaker
COB LED work light with possibility to hear music via bluetooth. A flexible foot, in which a strong magnet is integrated, allows for placement at the desired illumination angle. It is dust and waterproof and can be used both indoors and outdoors. Can be charged with a power supply unit or via USB.
Scope of delivery: light, power supply, 1m power cable (also for USB use), manual
Technical data:
COB/ LED
1000/ 2000 lux (stage 1/ 2)
300/ 600 lm (stage 1/ 2)
3,7V / 5200 mAh (li-ion)
6 hrs./3 hrs. battery use (stage 1/ 2)
5 hrs. charging time
-10°C to +40°C
IP 65 / IK 07
92 x 86 x 74mm
430g
AS SCHWABE work light "Slimline Chip LED"
cabled, LED, 30W, with stand and safety guard, protection calss IP65
For the mobile or stationary application, according to DIN EN 60598-1. With special developed original Samsung-SMD-LED. Reinforced aluminium die-casting housing, replaceable safety glass. Over 90% less energy consumption than halogen lamps, very low heat generation, dustproof, hose waterproof and suitable for permanent outdoor use
Technical data: using time over 50.000h, 220 - 240V, 50 - 60Hz, light colour 4000K (neutral white), approx. 2300 lumen, 5m connection cable, rubber hose line H05RN-F 3G1,0 with safety plug, max. height of the stand: 1,60m
AS SCHWABE work light "Slimline CHIP LED"
line-operated, LED, 50W, protection class IP 65
For mobile or stationary use. Spotlights with specially developed original Samsung-SMD-LED. Extreme slim, reinforced aluminium pressure housing, Spotlight can be swiveled and locked, removable safety glass, 120° beam angle, suitable for permanent outdoor use, dustproof and water-jetproof
Technical data: burning time over 50000 h, connection 230V/50 - 60 Hz, light color: 4000 K (neutral white), approx. 4250 lumen, 2m connecting cable, rubber hose H07RN-F 3G1,5
BRENNENSTUHL worklight "HL 3000"
multi battery LED, compatible with 18 V batteries 7 various manufacturers, withot battery
Robust 2 in 1 spotlight with removable battery protection cover (incl. 6 interface adapters) for 18 V batteries (various Ah classes) of the 7 Powertool manufacturers Bosch Professional, Dewalt, Festool, Flex, Makita, Metabo CAS and Milwaukee. Two light sources (SMD LED as a concentrated spotlight and a COB LED light ring) provide ideal working light with different light levels. It has an ergonomic handle, an adjustable magnetic base, a battery status indicator (the batteries are to be charged externally), which shows the remaining energy of the inserted battery and a protection system for Powertool batteries. This protects the batteries used from deep discharge and overheating.
On/off switch with function:
100% spot - 100% area light - 75% - 50% - 25% light
light duration (depending on the battery used):
at 100% light output approx. 50 min/1 Ah for the COB LEDs, approx. 100 min/1 Ah for the SMD LEDs
at 75 % light output approx. 67 min/1 Ah for the COB LEDs, approx. 133 min/1 Ah for the SMD LED
at 50 % light output approx. 100 min/1 Ah for the COB LEDs, approx. 200 min/1 Ah for the SMD LED
at 25 % light output approx. 200 min/1 Ah for the COB LEDs, approx. 400 min/1 Ah for the SMD LED
SCANGRIP work light "Tower Lite CAS"
floodlight with integrated tripod, 5000 lm
The flexible spotlights are compatible with the METABO/CAS 18 V battery system. For other manufacturers, an adapter / connector (see accessories) is required. They can be rotated 360°, are height-adjustable up to 2m and are equipped with two light levels (50 - 100 %). For unlimited light availability, the spotlight can be connected to the mains via power adapter (not included). The stand has an integrated carrying handle and a quick-fold system. In combination with the low weight (5.2kg) it is very compact and folded, very easy to take along.