Semi-synthetic multigrade oil with a specially selected additive package, can be used in manual transmissions, hypoid axle drives, planetary gearboxes, side/auxiliary drives and steering gears. It is suitable for non-synchronized and synchronized transmissions. A stable lubricanting film which reduces wear and tear and the gear noise even under high loads. An improved shiftability, faster oiling and low "cold wear" are ensured by the low cold viscosity. Specifications and approvals API GL-4/5
MADE IN GERMANY - FILLED IN HOYA
SPEC-X lubricants are made exclusively from high quality first refinements and special additives.

Multigrade gear oil, based on extremely high-quality HC synthetic base oils and a specially selected additive package, suitable for a wide range of applications such as axle and manual transmissions and especially suitable for synchronizers and heavily loaded differential gears. Even under high loads, a stable lubricating film develops, which reduces wear and transmission noise. Improved shiftability, faster oil penetration and reduced cold wear are ensured by the favorable cold viscosity. Specifications and approvals: API GL-4/ GL-5, MIL PRF-2105 E, SAE J 2360
NOTE: Not suitable for use in continuously variable transmissions, double clutches and continuously variable automatic transmissions.
MADE IN GERMANY - FILLED IN HOYA
SPEC-X lubricants are manufactured exclusively from high-quality primary raffinates and special additives.

SAE 80W, mineral, approvals: API GL4, MB 235.1, MIL-L 2105, ZF TE-ML 17A, ZF approval number ZF000694, specifications / manufacturer recommendations: MAN 341 type E1, MAN 341 type Z2
For vehicles with manual, auxiliary and axle drive transmissions with normal to high loading. Provides a stable lubricating film. Minimizes wear. Provides extremely good lubrication properties and outstanding corrosion protection. Enables smooth shifting.
Note: The regulations of the vehicle or aggregate manufacturers must be observed. When selecting, observe the viscosity class prescribed by the gearbox manufacturer. Mixable with all branded gear oils. Full effectiveness only when used unmixed.

ATF, mineral, Approvals: Allison C-4, Allison TES 389, Specifications / recommendations of the manufacturer: MAN 339 Z1, MAN 339 V1, Dexron III G, Dexron III H, Dexron II D, MB 236.6, MB 236.5, Volvo 97341, Ford WSS-M2C 166-H, Ford WSS-M2C 138-CJ, CAT TO-2, Voith 55.6335, ZF TE-ML 03D, ZF TE-ML 02F, ZF TE-ML 04D, ZF TE-ML 17C, ZF TE-ML 11A, ZF TE-ML 11B, ZF TE-ML 09B, ZF TE-ML 09A, ZF TE-ML 14A, DTFR 13C100, DTFR 13C140, DTFR 13C170
Multifunctional ATF for use in automatic transmissions, hydraulic steering systems, torque converters and power transmissions in passenger cars, commercial vehicles and work machines. Paints: Red

Note: The specifications and regulations of the unit and vehicle manufacturers must be observed.

SAE 85W-90, replaces AXLE EPX 90
specifications / manufacturer recommendations: API GL 5, MB-approval 235.0, ZF TE-ML 16C, 17B, 19B, 21A
Ultra-high-pressure transmission oil for hypoid gears and axle drives according to manufacturer's instructions. High-quality base oils and
a balanced EP additive combination ensure optimum wear and corrosion protection.
Note: The manufacturer's instructions must be observed during use!

SAE 75W-90, HC-Synthesis, Approvals: MIL-L-2105D, MIL-PRF-2105E, Specifications / recommendations of the manufacturer: API GL-4, API GL-5, API MT-1, SAE J 2360, DTFR 12B140, MAN 341 Z2, MAN 342 S1, Scania STO 1:0, Volvo 97312, Eaton, ZF TE-ML 05A, ZF TE-ML 02B, ZF TE-ML 12L, ZF TE-ML 21A, ZF TE-ML 12N, ZF TE-ML 19C, ZF TE-ML 16F, ZF TE-ML 17B, Arvin Meritor 076-N
Smooth-running transmission oils for very high mechanical and thermal loads, even at longer intervals. Multifunctional ATF for use in automatic transmissions, hydraulic steering systems, torque converters and power transmissions in passenger cars, commercial vehicles and work machines. Paints: Red.

Note: The specifications and regulations of the unit and vehicle manufacturers must be observed.

SAE 75W-90, replaces SYNTRANS TRANSAXLE 75W-90
fully synthetic, specifications / manufacturer recommendations: API GL-4+, VW 501 50
Recommended for transaxle systems (manual transmission and final drive in one housing), manual transmissions, transfer cases and final drives of passenger cars, vans and transporters. Promotes low fuel consumption as well as a reduction in exhaust emissions.
Note: The specifications and regulations of the unit or vehicle manufacturer must be observed.

SAE 85W-90, mineral, approvals: API GL4, MAN 341 Typ E1, MAN 341 Typ Z2, MIL-L 2105, ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A, ZF approval numnber ZF002054
For manual, auxiliary and axle drive transmissions with normal to high loading. For vehicles with tested transmission technology. Provides a stable lubricating film. Minimizes wear. Provides extremely good lubrication properties and outstanding corrosion protection. Enables smooth shifting.
Note: The viscosity class prescribed by the gearbox manufacturer and the regulations of the vehicle or aggregate manufacturer must be observed. Can be mixed with all branded gear oils.

SAE 80W, mineral, approvals: API GL5, MIL-L 2105 D, ZF TE-ML 17B, specifications / manufacturer recommendations: MAN 342 type M1, Volvo 97314
Mineral low-viscosity hypoid gear oil for vehicles with tried and tested transmission technology and for highly stressed vehicle transmissions without limited-slip differentials, especially axle drives with hypoid gears. Guarantees the greatest safety reserves under critical conditions. Provides a stable lubricating film and minimizes wear.
Note: The regulations of the vehicle or aggregate manufacturers must be observed. When selecting, observe the viscosity class prescribed by the gearbox manufacturer. Mixable with all branded gear oils. Full effectiveness only when used unmixed. Use only in gearboxes that require API GL 5 oils.

automatic, red, HC synthesis, specifications / manufacturer's recommendations: ALLISON C4, CATERPILLAR TO-2, FORD M2 C- 138CJ, Mercon, GM 6137-M DEXRON II-D, MAN 339 V1/Z1, MB 236.7, 236.5, VOITH H55.6335xx, ZF TE-ML 03D, TE-ML 04D, TE-ML 09, T E-ML 11A, TE-ML 14A, TE-ML 17C
The oil can be used in automatic transmissions, torque converters, power steering and hydraulic circuits where the manufacturer specifies a product that meets the requirements of General Motors ATF TYPE Dexron II-D.
Note: Operating instructions of the automotive, transmission and hydraulic system manufacturers must be followed.