Semi-synthetic multigrade oil with a specially selected additive package, can be used in manual transmissions, hypoid axle drives, planetary gearboxes, side/auxiliary drives and steering gears. It is suitable for non-synchronized and synchronized transmissions. A stable lubricanting film which reduces wear and tear and the gear noise even under high loads. An improved shiftability, faster oiling and low "cold wear" are ensured by the low cold viscosity. Specifications and approvals API GL-4/5
MADE IN GERMANY - FILLED IN HOYA
SPEC-X lubricants are made exclusively from high quality first refinements and special additives.

SAE 80W-90, mineral oil-based, specifications / manufacturer recommendations: API GL-4, API GL-5, MAN 3343 Typ M, ZF TE-ML 02B/ 05A/ 07A/ 12E/ 16B/ 17B, Scania STO 1:0, MIL-L-210
Mineral oil-based for use in heavily loaded manual shifting and other gearboxes where EP properties are required and pure mineral oil based EP gear oils pose problems. Ideally suited for use in gearboxes with shifting problems.
Note: The specifications and regulations of the aggregate or vehicle manufacturers must be observed.

SAE 80W-90, synthetic, spcifications / manufacturer's recommendations: API GL-4, API GL-5, API MT-1, ARVIN MERITOR 0-76-N, DAF GL5/MIL-PRF-2105E, IVECO MIL-PRF-2105E, MACK GO-J, MAN 341 E-2, MAN 341 Z-2, MAN 342 M-2, MB 235.0, MIL PRF-2105E, RENAULT B0032/3 Annex 3, SAE J 2360, SCANIA STO 1, ZF TE-ML 02B, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 08, ZF TE-ML 12E, ZF TE-ML 12L, ZF TE-ML 12M, ZF TE-ML 16B, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 17B, ZF TE-ML 19B, ZF TE-ML 21A
This oil is especially recommended for all manual transmissions and axle drives of heavy vehicles and large trucks. Due to its universal applicability, it can be used without problems for all transmission parts for which API GL 4 or GL 5 oils are recommended.
Note: Regulations of the vehicle and transmission manufacturers must be followed.