standard, for alloy rims, zinc
universal, for usage on rims with normal rim flange

3 pieces, brass nickel-plated, with red seal ring for high operating temperatures
Due to the design, this special insert is suitable for a large number of valve types and also for special valves. For trucks, cars and motorcycles, opening pressure higher as 4,5 bar, working pressure lower as 20 bar, temperature range: - 60°C - 200°C

package unit: 100 pieces

standard, for steel rims, zinc
universal, suitable for most steel rims. Fine zins coating with elastic poly coating. It is recommended to use of a weight pliers with plastic impact part

plastic, black

for tubeless car tires (snap-in)

Manufactured to DIN 7780, with gas-tight metal Valve Ccps
Can be used for tubeless tires on cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle 25°. If this is not guaranteed by the wheel cap or other supports, the rubber valves must not be installed. In such cases, we recommend using metal valves.

Technical data:
Material: Rubber
Rim hole Ø: 11.3 mm
Length: 33 mm
Working pressure (max.): 4.5 bar
Axial pull-in torque (max.): 600 Nm

adhesive weight strip, steel, black
Flat design (3,8mm), with premium adhesive tape, powder coated, 100 pieces

universal, for steel rims, steel
All weights are protected against corrosion with an elastic poly coating and therefore comply with the requirements of the automotive industry according to DIN 50 021 SS and ASTM B 117-73 after a 480 hours of salt spray test. Processing with weight pliers.

Standard, for steel rims, zinc
Universal weight with good fit and excellent price-performance ratio. The use of weight tongs with plastic impact part is recommended.