For cavity spray can (#4.09 03 89/0), reusable, length: approx. 60 cm

Light beige, transparent, low-viscosity corrosion protection for cavities
Water-repellent, temperature-resistant from -25 °C to +160 °C, with good creeping properties. Provides long-lasting protection for body cavities such as sills, pillars, door interiors and headlight housings. Resistant to water, road salt spray, Oil, light acids and alkalis.

Corrosion protection and lubricants, thixotropic
The product is used for metal products, machines and sports equipment during storage and transportation in a closed environment (up to 3 years), in covered outdoor areas (up to 1 year) and in outdoor areas (up to 5 months). It forms a very even, non-drying corrosion protection film that also penetrates into corners and edges that are difficult to access. It is also resistant to acidic atmospheres and other environmental influences.

Note: The applied layer thickness should be approx. 5 - 20 μm, i.e. 20 - 40 m² of surface can be treated per liter. After protection, it can be cleaned with
detergents, e.g. anionic wetting agents.

grey, quick-drying, resistant to water, salt water and light acids and bases
Universal surface coating that permanently seals welding spots and seams. The product acts as corrosion protection when welding between two materials. Also suitable for use in gas shielded arc and spot welding as a spot weld sealer. For applications in the field of bodywork and vehicle construction, metal construction, in welding stores, in shipping, on construction and agricultural machinery as well as in industry and trade.

Universal, nylon, with integrated 3-spotlight round nozzle
The probe enables professional spraying in all cavities and gaps.

wax spray, bitumen-free, PVC-compatible
For the preservation of vehicle bodies and rust-prone areas in the engine compartment. Suitable for repair work. Has a good creeping ability, does not drip and is suitable for long-term protection. Slight spraying of rubber parts gives a dull shine and fresh look

long-term sealing, forms a waxy, olive-brown film
For machinery, vehicles, winter maintenance vehicles, agricultural and construction vehicles, shafts, steel coils, semi-finished and finished products. Forms a compact waxy protective film that does not become brittle, protecting against most environmental, direct weather influences (including flue gas), atmosphere and salt water. Suitable also for protection and insulation of electrical cable lugs and screw terminals. Cab be removed by white spirit or petroleum solvents or "BRUNOX Turbo-Spray" when protection is no longer required

Note: Film thickness min. 20 µm. With a dry film thickness from approx. 50 µm, the best possible corrosion protection is achieved. A wet film thickness of 125 µm gives a dry film thickness of 50 µm. This requires a 0,63 l/m².

sprayable rust inhibitor based on wax, transparent
Firmly adhering, adhesive-free drying, water repellent, temperature resistant till 100°C. To protect folds and surfaces on motor vehicles, construction machinery and gardening equipment. Due to its light color it is particularly suitable for the protection of folds on the hood and in the trunk.

Note: After through-drying, remains a firmly adhering, plastically tough and water-repellent film. The yield point of the dry substance is above 100°C, so that even in the engine compartment there is no risk of run-off or dripping. The dry film has good adhesion to raw and painted sheets. The material is also preferred for preservation of the cleaned engine compartment.

aerosol wax polish and corrosion inhibitor
Suitable for the treatment of small, isolated places. Can be applied on layers based on PVC, PVC/wax, rubber/resin or KTL. OEM-specified, temperature resistant and creeping. With the additionally attached spray pipe also the cavities can be well achieved, e.g. in doors and in the engine compartment.

2K-foam, for accident repair, repair and restoration of body parts
The foam adheres to metallic surfaces, wood and many plastics (including styrene, PU rigid foam, polyester, etc.) and fiber composites. Body and add-on parts such as sills, hood, door, A-, B- and C-pillars, trunk lids, roof and floor sections as well as rear and side panels can be filled, relined and thus protected from vibrations and contact corrosion. The foam is also suitable for eliminating and damping sound, noise and noises in cavities and on the car body.

Technical data:
base: polyurethane
color: anthracite
temperature resistance: -35°C to +90°C
volume yield: up to 10 l (free foamed / 400 ml)
density: approx. 35 kg/m³
substrate temperature: +5°C to +30°C
pot life:10 minutes (open time, processing time)
adhesion-free: approx. 25 minutes
cuttable after: approx. 30 minutes
curing time: 50 minutes
fully loadable: after 24 hours
fire behavior: building material class B2
shelf life: 18 months; store upright and dry between +5°C and +25°C