2-K polyester putty, with hardener, styrene-, asbestos- and silicone-free, white
Highly flexibole, quickly curing, temperature resistant with hardened material up to 120°C. To fill smaller imperfections and the thin fine plastered of already previously treated surfaces. Suitable for surfaces made of metal, wood, concrete or pre-filled with presto filling filler. Microfine fillers give a very smooth surface. Can be grinded after approx. 30 minutes, flash point at approx. 33°C, curing agent addition: 2 - 4%.

2-component putty, polyester resin-based, styrene-reduced, incl. hardeners, bright white
Adheres to iron, steel, aluminum, GRP and wood. Suitable as a top and fine filler for application in thin and very thin layers, as a top coat over PE filling putty, for closing any remaining pores or small irregularities and for removing minor paint damage, scratches, etc. on the bodywork. Application on vertical surfaces is possible without any problems. The styrene content is less than 10 %.

1-component acryl putty, quick drying, beige For equalizing of small bumps, scratches and pores on putty surfaces, priming surfaces or filler surfaces as well as on GRP or polished old sprayings. Apply only in thin layers also a direct adhesion to steel, aluminum, galvanized steel substrates and following plastics: ABS, PVC hard, PC, PS, PA, PP/EPDM, POM and A-PET. Due to the modified viscosity setting, a creamy consistency is given, which ensures a pore-free and easy application. Application only in thin layers, recoatable with all conventional paint systems.

Low-viscosity 2-component polyester lightweight filler
For smoothing depressions and unevenness in car repairs. It is characterized by its smooth and non-porous surface, making the use of an additional fine filler unnecessary. It can be sanded with high abrasion after a short drying time. Adheres to iron, steel, aluminium, galvanized substrates, GRP and wood. No sagging of the filler.

2K-polyester putty, paintable, pourable, light green pigmented
Flowable, self-leveling, puttable. For application in thin and thinnest layers as a cover layer over PE fille, to close any pores and repair of minor paint damage (scratches, striae, etc.). Very smooth, paint-like interface with high gloss, low grinding work needed. Adhesion on iron, steel, aluminium, galvanized surfaces, fiberglass and wood. Extremely quickly and easily grindable.

2K-Epoxy filling putty with lamellar pigmentation, universal
Adheres to iron, steel, aluminum, zinc, GRP and wood. The product is suitable as a substitute for work with alluvial tin. It is easy to fill, can be sanded well and with low dust after a short drying time and has high adhesive and flexural strength. Processing on vertical surfaces is possible without any problems. It has good resistance to gasoline, diesel and diluted acids.

Please note: EPN hardener (#292100000 / 8.94 19 41/2) to be ordered at the same time!