1-component acrylic clear coat with UV protection, ready-to-spray, glossy
As a topcoat for two-coat finishes. Good weather resistance and gasoline resistance provided with a short contact time. Yield: 6 - 8 m² / l
Note: This product is not recommended as a topcoat for waterborne basecoats.

2-component HS express paint, low-viscosity
For a fast and efficient refinish (express technology), which ensures extremely fast drying by oven as well as by air. Due to the special formulation, Mipa 2K express clearcoat CX 11 hardens very quickly at room temperature (20°C) and can be polished by hand after approx. 50minutes of drying. For more intensive polishing with a polishing machine, this is possible after approx. 90 minutes. For partial car painting and use in the spot repair. Ready to use after addition of hardener, resistant to environmental and weather influences, resistant to yellowing and offers a lasting gloss retention and a very good scratch resistance.

2-component high-solid acryl paint, VOC-compliant
For the full and partial painting of passenger cars and commercial vehicles with a particularly brilliant clearcoat and optimum flow on solvent- and water-based paints. Guarantees an optimum hardening with oven drying as well as room temperature drying. Can be polished immediately after forced drying and has high resistance to all weather conditions, as well as chemical and mechanical loads. Also suitable as a protective varnish for neon colours (daily luminous colours). Simple and safe processing in all climatic conditions.

high scratch resistant 2K-HS acrylic paint based on reflow technology
Thanks to new binder technology, it is particularly easy to process and ideally suitable for over-painting water-based paints. Excellent gloss preservation. Due to its high resistance to micro-scratches (produced e.g. by washing lines) and chemicals, it is particularly suitable for the high-quality full and partial painting of cars, motorcycles and commercial vehicles.

high-solid-acryl paint, VOC-compliant
For the full and partial painting of passenger cars and commercial vehicles with a particularly brilliant clearcoat and optimum flow on solvent- and water-based paints. Easy processing, perfectly polished immediately after forced-air drying. Can be polished immediately after forced drying and has high resistance to all weather conditions, as well as chemical and mechanical loads. Also suitable as a protective varnish for neon colours (daily luminous colours). The application is very variable due to the combination with different Mipa 2-component HS hardeners and dilutions. Excellent drying properties, especially with oven drying.

elastic 2-component paint, glossy silk
Especially for the overcoating of basecoats (Mipa BC and Mipa WBC) on plastic surfaces. Excellent weather and yellowing resistance. High mechanical and chemical resistance. The gloss level corresponds to the common, gloss-reduced plastic coatings.

2-component high-solid acryl paint, very slow increase in viscosity after the addition of hardener, VOC-compliant
For full and partial paintworks on cars and commercial vehicles and provides a particularly brilliant finish and an optimal flow on solvent- or water-based basecoats. Assures a very fast surface drying and complete curing during both oven drying and drying at room temperature. Can be polished optimally immediately after force drying and presents high resistance to all kind of weathering as well as to chemical and mechanical strains. Also suitable as protective topcoat for neon colours (daylight fluorescent colours). Easy and reliable processing under all climatic conditions.
Note from the manufacturer: While conventional, quick-drying clearcoats usually thicken very quickly after the addition of hardener and this leads to poor clearcoat flow, Mipa 2K-HS clear paint CC 9 guarantees a constant spray viscosity for up to one hour after the addition of hardener (refers to Mipa 2K-HS hardener HS 25 and HS 35). This means that longer painting work is possible without any problems with an optimal clear coat. This leads to a reliable application behavior and significantly reduces the risk of incorrect paintwork.

2-component HS express varnish, high-solid acrylic varnish
For fast and efficient refinishing (express technology) especially with oven drying. After drying for 15 minutes at 60°C or alternatively 25 minutes at 40°C, the painted parts can already be polished after cooling. Also suitable for car part painting. Ready for use after addition of Mipa 2K-HS-Hardener. Excellent resistance to environmental and weathering influences, resistant to yellowing and durable gloss retention.

2K-HS-Expresspaint, acrylic basis
For quick and efficient refinishing (express technology), which generally does not require oven drying. Due to the special formulation, Mipa 2K-HS-Express-clear coat CX 3 hardens very quickly at room temperature (20°C) and can be polished after approx. 60 minutes of drying. To ensure optimal polishability, the polishing work should be carried out within 3 hours. If necessary, oven drying is also possible, in which full polishability is achieved after drying for approx. 15 minutes at 60°C plus cooling phase. Particularly suitable for passenger cars partial and part coatings (complete vehicle side plus front flap) and use in the spot repair area. Ready to use after adding hardener. Excellent resistance to environmental and weathering influences, resistant to yellowing, offers permanent gloss retention, and is also extremely scratch resistant.

2-component coating, VOC-compliant high-solid acrylic clearcoat, gloss level 15 - 20 gloss units at an angle of 60°
For high-quality matt coatings (full and partial coating) in the passenger car sector. Also very suitable for adjusting the gloss level of Mipa 2K-HS-Clearcoats and Mipa 2K-HS-Express-Clearcoat CX 2. Ensures a uniformly matt clearcoat on solvent- and water-based paints. Exhibits high resistance to all weather conditions, as well as chemical and mechanical loads.