hot wax lubricant, based on wax with Wolfram-Di-Sulphide in nanoscale (also known as NanoPlatelet WS2), reduces friction, dip bag (place the chain in the wax bag and dip in hot water)
Approx. 8-10g wax are required per application!

lubricant based on wax with Wolfram-Di-Sulfide in nanoscale (also known as NanoPlatelet WS2), reducing fritction

Especially suitable for cleaning and degreasing of disc/drum brakes, brake shoes, brake pads and oil pumps. No squealing when braking, strong degreasing properties, oil, grease and dirt pearl off, for all surfaces. Content and can were optimised

DOT 5.1, suitable for all hydraulic brake from SRAM and Avid

Formula based on oleogelation process, eliminates the need for harsh degreasers, one chip per chain, chip becomes waxy when heated, quick and easy application, efficient and environmentally friendly cleaning and maintenance of the bicycle chain, changing from the factory-packed chain to the waxed chain takes 10 minutes, 6 pieces of 12g each

For the cleaning and degreasing industrial parts, brakes and brake discs. Effectively removes oil, grease, dirt and brake dust. Ventilates without residue. Pleasant smell, good material compatibility and extre strong spray jet

Significantly less friction and wear. PTFE additive guarantees extremely high smoothness of all moving parts. Special polymers reduce the metal friction to a minimum = perfect lubrication. Significantly reduces required effort. Ideal corrosion protection. Long lubrication. Significantly reduced noise of the chain.

multifunctional product, rust remover, lubricant, contact spray, cleaner, corrosion protection
Protects metal against rust and corrosion, penetrates to jammed parts, displaces moisture and lubricates almost everything. It removes grease, soot and other dirt from surfaces. Suitable for garden tools and devices, battery connections, bicycle frames, door locks and hinges, electric tools, motors, alloys and exhaust systems.

Works 4-time excellent - the all-rounder for always clean chains. Dissolves rust and dirt, contains detergent substances that penetrate into the narrowest tolerances of the chain. Dirt & debris in the chain inner bearing are loosened and flushed out. Also externally cleaned chain, drive & sprockets and gears. Although chain cleaning is the main focus, a thin, almost dry and non-sticky lubricating film remains on and in the chain after the washing-active substances have evaporated (6-8h). Therefore, there is an extremely low dirt adhesion. The good surface adhesion results in excellent corrosion protection. The chain fluid is fully synthetic, which achieves a significantly greater lubrication performance than mineral oil products.

electronic wax warmer, temperature setting 75-125°, 600ml capacity
StripChip 0.356.371/0 must be ordered separately.