hot wax lubricant, based on wax with Wolfram-Di-Sulphide in nanoscale (also known as NanoPlatelet WS2), reduces friction, dip bag (place the chain in the wax bag and dip in hot water)
Approx. 8-10g wax are required per application!

lubricant based on wax with Wolfram-Di-Sulfide in nanoscale (also known as NanoPlatelet WS2), reducing fritction

Significantly less friction and wear. PTFE additive guarantees extremely high smoothness of all moving parts. Special polymers reduce the metal friction to a minimum = perfect lubrication. Significantly reduces required effort. Ideal corrosion protection. Long lubrication. Significantly reduced noise of the chain.

Works 4-time excellent - the all-rounder for always clean chains. Dissolves rust and dirt, contains detergent substances that penetrate into the narrowest tolerances of the chain. Dirt & debris in the chain inner bearing are loosened and flushed out. Also externally cleaned chain, drive & sprockets and gears. Although chain cleaning is the main focus, a thin, almost dry and non-sticky lubricating film remains on and in the chain after the washing-active substances have evaporated (6-8h). Therefore, there is an extremely low dirt adhesion. The good surface adhesion results in excellent corrosion protection. The chain fluid is fully synthetic, which achieves a significantly greater lubrication performance than mineral oil products.

Smoothness for the chain. High end lubricant, suitable for dusty dryness and extreme wetness. Does not stick, is weatherproof and works reliably

Application:
apply from the top to the chain links (a thin film of lubricant is sufficient)
rotate pedal to aplly on complete chain

with PTFE (teflon), is suitable for dry and wet conditions. Offers a very high wear protection, have penetrated properties, adhesive, ensures smooth chain operation

Application:
apply from the top to the chain links (a thin film of lubricant is sufficient)
rotate pedal to aplly on complete chain

oil-based lubricant, with Wolfram-Di-Sulfide in nanoscale (also known as NanoPlatelet WS2) and ZDDP, for best cleaning results, no waiting time to dry, reduction of friction

lubrication on biological basis, consists of more than 98% of renewable and natural raw materials
profitable long-term lubrication, reduces friction and wear, low-noise and easy running of the chain, extended service life, pronounced adhesion and long-lasting lubricating effect even under heavy load, free of colorants, fragrances and toxic substances, easily biodegradable, ideally suited also for e-bikes

Application:
Apply from the top to the chain links (a thin film of lubricant is sufficient)
Rotate pedal to aplly on complete chain

High quality spray for lubricating chains and sprockets on mountain bikes and cross bikes, low coefficient of friction with minimal resistant, excellent lubrication properties also with heavy loads, contain PTFE (polytetrafluorethylene), prevents wear, reduces dirt adhesion, resistant to weathering, water repellant, 360° valve

suitable for use under heavy load and weather conditions,for chain, shifting device, snakes ect., fail-safe lubrication characteristics even if the oil film is already worn off