Hypoid gear oil for extreme pressure loads on scooter gears and other motorized vehicles.
Specifications and approvals: API GL5, MB-approval 235.0, ZFTE-ML07A, ZFTE-ML16C, ZFTE-ML17B, ZFTE-ML19B, ZFTE-ML21A

approvals: API GL4

For automatic gearboxes.

Semi-synthetic multigrade oil with a specially selected additive package, can be used in manual transmissions, hypoid axle drives, planetary gearboxes, side/auxiliary drives and steering gears. It is suitable for non-synchronized and synchronized transmissions. A stable lubricanting film which reduces wear and tear and the gear noise even under high loads. An improved shiftability, faster oiling and low "cold wear" are ensured by the low cold viscosity. Specifications and approvals API GL-4/5
MADE IN GERMANY - FILLED IN HOYA
SPEC-X lubricants are made exclusively from high quality first refinements and special additives.

Highlloy multi-purpose transmission oil with EP additives for optimum power transmission with minimal oxidation, corrosion and foaming. Approvals: API GL4

Note: Do not use for mixing with fuel and not for gearboxes for which ATF is required.

Single-grade transmission oil based on mineral oil.
Benefits: Well adhering and pressure-resistant lubricating film, excellent oxidation stability, good viscosity-temperature behavior, wear resistant, no foaming and neutral towards metal and sealing materials.
Specifications and approvals: API GL4, MIL-L-2105

universal, specifications / manufacturer recommendations: Allison TES 389, MAN 339 L1, MAN 339 V1, MAN 339 Z1, MB-approval 236.9, Voith H55.6335.xx, Volvo-transmission oil 97341:071, ZFTE-ML04D, 14A. Erfüllt Allison C4, Ford MERCON, GM DEXRON-IIIH, Volvo-transmission oil 97340
<b>Multi-purpose automatic transmission oil</b>, which is used in many applications instead of GM Dexron II or III. The excellent low-temperature properties ensure trouble-free operation of automatic transmissions and converters even at low temperatures.
Note: The manufacturers instructions must be observed during use.

Multigrade gear oil, based on extremely high-quality HC synthetic base oils and a specially selected additive package, suitable for a wide range of applications such as axle and manual transmissions and especially suitable for synchronizers and heavily loaded differential gears. Even under high loads, a stable lubricating film develops, which reduces wear and transmission noise. Improved shiftability, faster oil penetration and reduced cold wear are ensured by the favorable cold viscosity. Specifications and approvals: API GL-4/ GL-5, MIL PRF-2105 E, SAE J 2360
NOTE: Not suitable for use in continuously variable transmissions, double clutches and continuously variable automatic transmissions.
MADE IN GERMANY - FILLED IN HOYA
SPEC-X lubricants are manufactured exclusively from high-quality primary raffinates and special additives.

10W-40,mineral oil-based multigrade motorcycle transmission oil. It is suitable for 2- and 4-stroke motorcycles with separate manual or automatic transmission with or without wet clutch. We recommend use where any multigrade motor oil in the transmission range of the manufacturer is chosen. Specifications and approvals: API SG, API GL 4