Tests the condition of the battery, does not require continuous current and only displays 5 different battery charge states after the button is pressed, electronics are molded waterproof, developed for permanent installation in the vehicle, flexible attachment to the linkage or handlebars using the cable ties provided, length of connection cable 1,2 m.
Battery charge states:
green – full
flashing green - sufficient
green-red – charging, ride
flashing red – empty, charging
permanent red - mandatory charging, voltage below 12.25 V, battery sulphates and is damaged

Tests the state of the battery and the generator, starting capability control, charging condition analysis, generator charging condition, easy to use, essential error tracing in the vehicle, splashproof

user-friendly all-in-one state of charge tester for 12 V AGM, STD & gel batteries
Displays the static charging voltage in volts and the percentage state of charge. Active charging voltage up to 15 V of the vehicle charging system or the connected battery charger. Flashing display when battery is discharged. 2-pin SAE connection according to industry standard. Incl. crocodile clips (cable length 100cm).

for 12V batteries, incl. crocodile clamp (cable length: 100cm)

With print function via PC printer. Suitable for all lead acid batteries such as standard, MTF, AGM, GEL, SLA, EFB and lithium batteries (all 12V vehicle and motorcycle batteries).
The battery test includes five different test parameters: Cold start current, voltage, internal resistance, capacity and state of charge. In addition, a starting test and a charging test of the alternator can be performed separately.
Short circuit and reverse polarity protection, easy to read large LCD display, crocodile clips with cable length 100 cm, language selectable: German, English, French, Italian and Dutch.
Technical data: cold start current measuring range, lead acid 20-2000 CCA, Lithium: 20-1000 CCA, test standards: CCA, SAE, DIN, BCI, EN, GB, CA, MCA, JIS, operating temperature 0-50°C, power supply via vehicle battery 8-30 V (DC).
Dimensions (LxWxH): 126 x 76 x 28mm, weight: 200g
Scope of delivery: BST1000-etui, mini-USB cable for PC printer port, user manual