Replaces the following lead-acid batteries: YTX4L-BS, YTX5L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Replaces the following lead-acid batteries: 12N5-3B, YB4L-B, YB5L-B
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Replaces the following lead-acid batteries: YTX4L-BS, YTZ5S, YTX5L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Replaces the following lead-acid batteries: YB4L-B, YTX4L-BS, YTZ5
Lithium iron phosphate technology, maintenance-free, ready to use, powerful, safe, long service life, very low self-discharge, super lightweight (approx. 30 % of lead-acid)
The UNIBAT lithium iron phosphate batteries are equipped with BMS technology (Battery Management System), which monitors cell balancing, charging and deep discharge of the individual cells, over 2000 JISD standard charging cycles, very high starting current, fast charging possible, up to 90 % capacity in 6 minutes, reinforced poles, 4 pole configuration +/- reverse (except ULT1), installation possible in any position, even upside down, delivery incl. modular spacer set, OEM Suppier
Notes:
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before first use.

Replaces the following lead-acid batteries: YTX7A-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Replaces the following lead-acid batteries: YTX9-BS, YTR9-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

DIN: 50412, Japanese designation: YTX4L-BS
Lithium iron phosphate.
Heat-resistant nylon housing, built-in microprocessor (balancer), waterproof housing, LED charge level indicator (display with six bars), very low self-discharge, extremely light, including foam adhesive adapter pads (Spacer), highest safety standard for lithium batteries.
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

Replaces the following lead-acid batteries: YTZ7S, YTX7L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.

Replaces the following lead-acid batteries: YB9-B, YB9L-B, YB7-B, YB7L-B, YB9A-A, YB9L-A2, 12N9-3B, 12N9-3A, 12N7-4B, 12N7D-3B, 12N7-4A, 12N9-4B-1, 12N7-3B
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!

We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.