black electrical insulation tape for electrical insulation work, PVC, high adhesive, certified by VDE and ÖVE acc. to type testing IEC 60454-3-1-10/F-PVCp/105. Dimensions (LxW): 4,5m x 15mm

For chargers OptiMATE 1, OptiMATE 2, OptiMATE 3, OptiMATE 4, OptiMATE 5, OptiMATE 6, OptiMATE 7, OptiMATE DC-DC, OptiMATE Lithium, Accu Mate, Accu Gard.

Mini USB on-board socket with 2A converts the input voltage from 12V to USB standard 5V. The 1,2m long cable has battery cable lugs for flexible mounting on the handlebar or pipe linkage. On each side of the housing is a groove for optimal attachment with cable ties. Holder and fuse are included.

compact DIN-angled plug, fits for BMW-series board sockets or BAAS board socket SD14/15. Through the angled cable outlet, the cable is not so far in drive mode as in the conventional plugs

Fully insulated bike battery disconnect switch for disconnection from electric system, to prevent total discharge of the battery during longer breaks such as clock, board computer, accessories etc. Can also be used as anti-theft protection because after disconnecting the starter voltage of the vehicle is no longer possible. The switch is mounted between battery (-) pole and vehicle. Charge max. 160A - 12V/10 sec. Switch size: (LxWxH): 62 x 25 x 38mm, cable length: 200mm

2-parts

for cig. lighter

Smart, fully automatic inline USB-C charger with standby mode and vehicle battery monitor, which ensures safe and fast USB charging of all devices mounted on the outside of the handlebar or in the tank or pannier. Ideal for 12 V AGM and 12.8 V LiFeP04/LFP lithium batteries. Charges a USB device with up to 3300 mA (at 5 V) of available current, with the charging current adapting to the connected device to ensure safe charging. Low input (< 12.4 V), automatic switch-off after one hour at the latest protects the vehicle battery from complete discharge Protection against short circuit, overheating and overvoltage.

Operation (voltage):
USB on, 13.3 V to 18 V, unlimited USB output, USB LED on. Supplies USB power when the vehicle engine is charging the battery.
USB one hour, 12.4 V to 13.3 V, 1 hour USB output, USB LED on. Switches to standby mode after one hour or voltage < 12.4 V.
Standby mode, voltage monitoring, switches back on when the vehicle battery voltage rises above 13.3 V.
AGM / LFP monitor, LED flashes every 5 seconds when the battery charge is ≥ 50 %, sufficient to start the vehicle engine.
AGM LED: 12.4 V to 13.1 V
LED LFP: 13.1 V to 13.3 V
no LED: < 12.4 V
off: ≤ 9 V

for BS-battery chargers: BS10/BA10, BS15, BS30, BS60 und BK20.

Enables permanent charging and a permanent connection to an OXFORD charger without having to remove the seat. With splash-proof cap and fuse holder.