- Aire libre y deportivas
- Bicicletas
- Consumibles/suministros de taller
- Herramientas/accesorios de taller
- Marcas
- Marketing de Hartje
- Piezas de automóviles
- Piezas de bicicletas
- Piezas de motocicletas y escúteres
- Aceites, grasas y productos de cuidado
- Candados
- Chasis
- Cubiertas/garajes plegables
- Deportivo de carrera
- Elektric
- Analizadores de baterías
- Arranques
- Baterías
- Bobinas de encendido
- Bocinas
- Bujías
- CDI de unidades de encendido
- Cables
- Cargadores
- Cebador/arranque
- Cepillos de carbono
- Conectores/cables de bujías
- Contactos/capacitores
- Control de límite de velocidad
- Faros delanteros
- Faros traseros
- Fuentes de iluminación
- Fusibles
- Generadores
- Instrumentos de pantalla
- Intermitentes
- Interruptores/relés
- Luces de freno/interruptores de embrague
- Luces de matrícula
- Reguladores/rectificadores
- Sensores de temperatura
- Equipaje
- Escape
- Filtros
- Frenos
- Herramientas especiales
- Indumentaria/cascos
- Materiales de montaje
- Motor
- Navegación/comunicación
- Neumáticos
- Piezas MZ
- Piezas Simson
- Piezas de motos
- Piezas de repuesto Malaguti
- Pinturas/imprimadores
- Prensa
- Preparación de combustible
- Productos
- Promoción de ventas
- Rodamientos
- Tecnología de izado
- Transmisión
BAAS battery charger “BA150”
charging current 1,5 A, suitable for all 6 V and 12 V standard, AGM, fleece, gel and 12 V lithium batteries, battery capacity 1,5 Ah - 60 Ah, fully automatic main and trickle charge
Switchable from 6 V to 12 V. Equipped with 6 LEDs, a cable length of 1,80m and the SAE connection with fully insulated crocodile clips, the charger optimizes the characteristic-controlled charge after battery selection and automatically switches to the maintenance mode after charging is complete. Reverse polarity and short circuit protected. Microprocessor controlled.
TECMATE battery charger "OptiMATE1 VoltMatic"
4-stage, fully automatic battery charger and maintainer, charging current 0,6A, suitable for all 6V and 12V standard, AGM and gel batteries, battery capacity 2 Ah - 28 Ah, automatic switch-off, freshness function
Charges and services all vehicle batteries without adjustments on the unit. VoltMatic- microprocessor automatically makes the correct charging voltage selection. Features three indicator lights to show charging is in progress. Protected against reverse polarity and short circuit. Dustproof case, with power cord and 370cm charging cable with SAE plug. With crocodile clips, plug-in contact cable for built-in batteries.
OXFORD charger "Solariser"
weatherproof and water resistant solar battery charger for all-season maintenance and care of 12 V batteries, trickle charge current between 10 mA and 100 mA
Charger is operated with daylight and charges the battery in trickle mode, no direct sunlight and mains power supply required, flashing LED indicates charging process, LED light indicates that the battery is being charged when light is present, a blocking diode ensures that the charger does not discharge the battery in low light conditions, three connection options, operating temperature range -20°C to +70°C, dimensions: 25,5 x 18,5 x 1,5cm.
The scope of delivery includes crocodile clips, eyelet cable, cigarette lighter and suction cups.
Under accessories you will find OXFORD folding garages, which have a window suitable for this solar battery charger.
Application instructions can be found under the media in the operating instructions.
TECMATE Battery Charger "OptiMATE1 DUO"
charging current: 0,6 A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity: 2 Ah - 30 Ah, automatic switch off, keep fresh function
4-stage charging and battery maintenance device, charges and maintains all vehicle batteries without settings on the device. With three indicator lights for charging process. Reverse polarity protected and short-circuit-proof. Dust-proof housing with wall bracket, with power cable and 370cm charging cable with SAE-plug. Slot for attaching a Velcro strap, so that the charger can be hung on the handlebar of a motorcycle. With crocodile clips, plug-in contact cable for built-in batteries.
BS-BATTERY Battery Charger "BS10"
max. charging current: 1A, suitable for standard, AGM, gel and lithium (LiPO4) batteries, for battery capacity: till 20Ah, automatic switchoff, keep fresh function, crocodile clamp
fully automatic 3-stage charging control, protection against short circuit, protection against reverse polarity and overheating, corrosion protected isolated clamp, secured additional plug with ring eyelets. Charging functions: fully automatic main charge and maintenance charging
OXFORD battery charger "Oximiser 900"
Suitable for all 12 V battery types up to 30 Ah, including gel, lithium, MF and acid batteries. Heavily discharged batteries up to 4.1 V can be charged if the battery is not damaged. 6-stage battery management system: polarity check: checks if the battery cables are connected correctly battery analysis: evaluates the battery and determines the best charging method Bulk Fast Charge: fast charge to bring the battery to approx. 85% capacity absorption charge: lowers the charge rate and delivers a top-up charge to ensure the battery is 100% charged voltage check: hourly voltage checks evaluate battery condition maintenance mode: applies an appropriate charge when voltage falls outside acceptable limits to ensure battery voltage and condition remain perfect. Thanks to the clear LCD display, a wealth of information can be seen at a glance.
Included are charging clips, eyelet cable and wall mount.
6-stage battery management system:
polarity check: Checks whether the battery cables are connected correctly.
battery analysis: Evaluates the battery and determines the best charging method.
bulk fast charging: Fast charging to bring the battery to approx. 85% capacity.
absorption charge: Reduces the charging speed and provides a top-up charge to ensure the battery is 100% charged.
voltage check: Hourly voltage check to assess the battery condition.
maintenance mode: Automatically performs an appropriate charge when the voltage falls outside the permissible limit to ensure that the battery voltage and condition remain perfect.
OXFORD battery charger "Oximiser Pro 900"
charging current up to 0,8 A, suitable for all 12 V standard, AGM, MTF, gel and 12 V lithium iron phosphate batteries (LiFePO4), battery capacity from 3,5 Ah to 20 Ah, easy-to-read LCD display
The intelligent 7-stage fully automatic battery-saving battery reset, charge, test and maintenance unit ensures that every battery is correctly and safely charged to its optimum voltage before switching to maintenance mode, which extends the service life of the battery.
The soft-start charging mode improves the recovery of deeply discharged batteries.
The impact and fire resistant ABS housing of the Oximiser Pro is suitable for use in any environment and is ultrasonically sealed. The scope of delivery includes crocodile clips, eyelet cable and a hook for hanging.
7-stage battery management system:
Polarity check: Checks whether the battery cables are connected correctly.
Battery analysis: Analyses the battery and determines the best charging method.
Soft-start charging: Controlled build-up of the charging current so that discharged batteries are charged safely.
Bulk fast charging: Fast charging to bring the battery to approx. 85% capacity.
Absorption charging: Reduces the charging speed and provides a top-up charge to ensure the battery is 100% charged.
Voltage check: Hourly voltage check to assess the battery condition.
Maintenance mode: Automatically performs an appropriate charge when the voltage falls outside the permissible limit to ensure that the battery voltage and condition remain perfect.
BS-BATTERY battery charger "BS15"
max. charging current: 1,5A, suitable for standard, AGM and gel batteries, for battery capacity: till 30Ah, automatic switchoff, keep fresh function, desulphation mode, others: crocodile clamp. Microprocessor-controlled fully automatic 8-stage charging control, patented battery revival mode, battery state analysis, protection against short circuit and discharge protection, protection against reverse polarity and overheating, corrosion protected isolated clamp, secured additional plug with ring eyelets. Charging function: initial test, (automatically decides in which operating mode must be switched), desulphation mode, gently initial charge, fully automatic main charge, absorption charge, (prevents overheating), final charge test, float mode (max. load is maintained, restarting after 21 days) long time battery maintenance mode (special charge pulse holds battery in optimum condition)
TECMATE battery charger "OptiMATE 2 DUO"
5-stage, fully automatic device for charging, maintaining and servicing batteries of the BRONZE series, charging current 2 A, suitable for standard, AGM, EFB and gel batteries, battery capacity 6 Ah - 96 Ah
and 12,8 V/ 13,2 V lithium iron phosphate batteries (LiFePO4 / LFP) from 2 Ah - 24 Ah, automatic switch-off, freshness function
Safe 24/7 long term maintenance, automatically adjusts to lead or lithium batteries, weatherproof case with wall brackets, can be used indoors and outdoors, with alligator clips, plug-in contact cable for installed batteries and 180cm charging cable with SAE- plug.
TECMATE Battery Charger "ACCUMATE"
charging current: 1,2A (by 12V), for standard, AGM and gel batteries, battery capacity: 4Ah - 75Ah, automatic switchoff, keep fresh function, desulphation mode
Versatile charger for modern and classic batteries. Suitable for all rechargeable 6V and 12V starter and deep cycle lead batteries. All customary batteries, gel batteries, seald MF batteries or "Gas Recombination Technology"-batteries are loaded correctly and effectively. Also ideal for long-term connection and maintenance of batteries that are not in daily use, even for months. Crocodile clamp, plug cable for built-in batteries