ABS STUTE fuel hoses

Type 2 A, E10, smooth, with textile braid inlay, according to DIN 73379 / 1997
Pressure hose for pumping leaded / lead-free fuels and diesel fuels, but not for bio-diesel. Blending of bio-diesel or blending of bio-ethanol (ETBE up to max. 7 to 10 %)

Technical data: Hose core: NBR compound, fuel and oil resistant (nitrile rubber), liner: textile braid (CV / viscose), outer layer: CR compound (chloroprene rubber), paints / marking: black, DIN-compliant labeling, temperature resistance: Continuous temperature -35 to 90° C, Peak temperature: short-term up to 110° C; Cold behavior: filled with FAM test fuel and 180° bending down to -35° C, (not for tubes >15 mm outer diameter), Test pressure (tightness): Air: 4 bar over 60 seconds, water: 20 bar over 30 to 40 seconds, working pressure: <10 bar, burst pressure: according to DIN 53758, tolerances: according to EN / ISO 1307 / 97