Bike-Lift Workstand "Creator"
black
Application: The wheels are mounted using an axle and two plastic washers per side, along with a Starlock cap. Please make sure that the axle is inserted from the outside and the Starlock cap is placed on from the inside. The Starlock washer can be secured with a light tap from a Rubber Hammer.
- Nº de artículo 05764642
- Número original: 901040101100
Left single-arm swingarm, Dimensions (LxWxH): 55 x 68 x 42 cm
Thanks to its modular design, the workstand can be personalized for the customer with a variety of differently colored wheels and color-coordinated to match the specific vehicle.
Please order wheels and vehicle-specific adapters separately.
PU 1
Información sobre el producto
- Anchura 68.0 cm
- Artículo Article
- Color principal Negro
- Longitud 55.0 cm
- Uso swinging arm
- Versión motorcycle assembly stands / lifts
- Número de artículo del proveedor: 901040101100
- UVP 122,52 €
- SB-Artículo No
- Marca/Proveedor Bike-Lift
- Unidad de medida: PIECE
- product data sheet Bike-Lift Workstand Creator Danish
- product data sheet Bike-Lift Workstand Creator German
- product data sheet Bike-Lift Workstand Creator English
- product data sheet Bike-Lift Workstand Creator Spanish
- product data sheet Bike-Lift Workstand Creator French
- product data sheet Bike-Lift Workstand Creator Italian
- product data sheet Bike-Lift Workstand Creator Dutch
| Artículo | Precio | |
|---|---|---|
 20mm Ø, for Ø 10mm wheel axle Leer más... Read less
| PU 1 | |
 | PU 1 |
| Artículo | Precio | |
|---|---|---|
 Ducati, mandrel dimensions: length: 90mm, diameter: 40mm Leer más... Read less
| PU 1 | |
 MV-Agusta, mandrel dimensions: length: 89mm, diameter: 42,2mm Leer más... Read less
| PU 1 | |
 Ducati, mandrel dimensions: length: 58/35mm, diameter: 21,8/25,9mm Leer más... Read less
| PU 1 | |
 mandrel dimensions: length: 155mm, diameter: 53mm Leer más... Read less
| PU 1 | |
 Triumph / KTM, mandrel dimensions: length: 92mm, diameter: 27,5mm Leer más... Read less
| PU 1 | |
 Honda, mandrel dimensions: length: 94mm, diameter: 28,7mm Leer más... Read less
| PU 1 | |
 Honda, mandrel dimensions: length: 95mm, diameter: 28,2mm Leer más... Read less
| PU 1 | |
 Honda, mount mandrel dimensions: length: 120mm, diameter: 18,1mm Leer más... Read less
| PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 | |
 | PU 1 |
Ejecuciones
Con la ayuda del campo de búsqueda, puede refinar la selección de variantes de producto.
| Artículo | Precio | |
|---|---|---|
 blackApplication: The wheels are mounted using an axle and two plastic washers per side, along with a Starlock cap. Please make sure that the axle is inserted from the outside and the Starlock cap is placed on from the inside. The Starlock washer can be secured with a light tap from a Rubber Hammer. Leer más... Read less
| PU 1 |