CONTEC Steering Tube Extension "Heads-Up"

It has to be the right HandlebarEvery cyclist has individual demands on their bike. As not all needs for special riding comfort can be met from a technical point of view, small changes make sense. This also applies to a tried and tested handlebar riser. The lightweight CONTEC "Heads-Up" fork shaft extensions weigh just 212 g and have been developed for the widely used Aheadset forks. Experienced trekking enthusiasts know that many adjustments can be made to the Handlebar to suit their needs. If the Handlebar is properly adjusted and adapted to the physical conditions, it can enable fatigue-free riding. In addition, the handlebar design in terms of width, height and bends is crucial for an ergonomic posture. Handlebar risers are ideal for influencing the handlebar position: The "Heads-Up" fork shaft extensions in silver or black can be used for handlebar forks measuring 1 1/8". With excellent tensile strength, the extensions for handlebars on MTBs and trekking bikes are made from 6061 aluminum, an unbreakable, corrosion-resistant material that is ideal for the stresses and strains that occur while riding on complicated terrain. To ensure the best possible height adjustment of the Handlebar on the steerer tube to different body sizes, 5 Spacers are supplied for height adjustment of the Stem. These include a large Spacer (8 mm) and 4 small Spacers (5 mm). With this product, the normal steerer tube can be extended by up to 67 mm. This not only makes Handlebars safer, but also puts less strain on the wrists. The CONTEC fork shaft extensions are therefore a versatile addition to any off-road bike.