GAADI Tube

No more problems when changing the hoseAll's well that ends well. Even better with 2 ends. The GAADI tube with its two ends is a truly special feature. But why all this? The principle is simple: thanks to the 2 ends of this inner tube, you don't have to completely remove the Wheel when changing the inner tube. This often complicated and usually quite time-consuming process is thus considerably simplified. The GAADI tube is a real problem solver. Because even if removing the Wheel is not a problem on a bike with a QR, the Axle on some bikes is firmly screwed in place. This means you need a wrench, which you usually don't have with you if you have a flat tire. The GAADI tube is also a very good idea for e-bikes with a rear hub engine. This is because removing the rear wheel is particularly difficult on these bikes. The GAADI tube is easy to use: First, cut the broken tube and pull it out of the tire. The second step is to insert the GAADI tube into the tire. It is important that the two ends touch each other. They should not be too far apart, but should not overlap either. Finally, inflate the tube and continue.