Deep-laid electro-hydraulic short-stroke platform for the tire, brake, shock absorber and car body service, carrying capacity: 3200kg
short cycle times, mechanic levelling system assures constantly the level of the lifting platforms regardless of weight distribution, safety according to the European standards, low-voltage (24V) electrical system with control circuit, joint bolts with self-lubricating and maintenancefree bushes
Technical data: lifting height: 100,0cm, height max.: 195,0cm, platform width: 42,0cm, platform length: 142,0cm, 3-phase engine with 2,6 kW, colour: anthracite / RAL 7016

load capacity up to 3000 kg, short lift, electro-hydraulic, incl. mobile kit (#30A552)
Especially suitable for tire, repair and body service workshops. With double stiffening brace for connecting and aligning the two rails, hydraulic synchronization control, non-return valve and safety valve in the event of a pipe breakage, fast-acting hydraulic unit and self-lubricating bolts in bronze bushes. The runways can be used as extensions thanks to the drive-on ramps, the dimensions are very small and the platform is mobile with kit #30A552 (included).

set deeper, extra flat double scissor lift, load capacity: 3000kg
Mechanical support device with automatic activation and pneumatic shut-off. Joint bolt with self-lubricating bushes (MTF), hydraulic synchronisation regulation of both driving rails, regardless of the load distribution, with patented self-balancing device. No mechanical connections between the rails, slowed down rail speed when lifting and placing on the floor, acoustic detector in the bottom area of the lowering. CE-tested, Low tension control circuit. Recommended for vehicles with defective suspensions and for lifting sports cars or lowered vehicles.
Plus assembly, first acceptance, freight and hydraulic oil

Technical data:
load capacity: 3000kg
lifting height max.: 190,0 cm
pick-up length: 142,0 - 195,0 cm
drive-on / drive-over height: 9.5 cm
guide rail length: 142.0 cm
width of drive rail: 61.0 cm
drive-on ramps: 26.5 cm
distance between rails: 80,0 cm
motor power: 2.6 kW
max. distance to operating column: 100 cm
weight: 725 kg
colour: anthracite / RAL 7016

load capacity up to 3500 kg, double scissor lift, electrohydraulic
Suitable for picking up from small cars to vans. With volumetric synchronization and double redundant master/slave circuit that guarantees the stability of the load even in the event of an anomaly (loss in the hydraulic circuit). The lift can be mounted either above ground or at ground level. A proximity sensor detects any obstacles under the lift during lowering. The hydraulic synchronization control monitors the lifting and lowering speed.

Technical data:
load capacity: 3500kg
traversing height: 105mm
lifting height: 1900mm
rail width: 614mm
length of the rails: 1547 - 2270mm
adjustment dimension (inside): 800 - 1000mm
lifting / lowering speed: 50 / 50 sec
mains voltage: 400 V / 50 Hz
power: 3,3 kW
control cabinet with 2 meter hoses
weight: 950kg

electro-hydraulic vertical lift, lifting capacity 5500 kg
Lift with safety valves to control the lowering speed, overload and to monitor the pressure lines. An automatic mechanical locking device on both rails ensures maximum safety. The electronic monitoring system is equipped with PLC and encoder for volumetric hydraulic synchronization control.

Features / technical data:
Integrated wheel-free jack, incl. 40 mm rubber blocks (#715/D), floor anchor bolts and floor plate, recess for turntable, rear sliding plates, all moving parts galvanized, self-lubricating bolts in bronze bushes, track length: 5600 mm, track width: 650 mm, internal dimension: 900 mm, overall height: 300 mm, wheel-free jack extension: 1150 mm - 2100 mm, wheel-free jack stroke: 440 mm, wheel-free jack lifting capacity: 4000 kg