Busch + Müller

3.0 x 0.5 mm

2,8 x 0,5mm

black

"309/4", single package

"309/4", bulk

"309V/4", single package, for 16" and 18"

Self-service packaged, mounts on the Handlebar, plastic mirror arm with integrated clamp mount, for handlebar diameters of 22.2 mm, three locking positions with memory function for parking, for right-side mounting

with plastic arm, mounting with clamps or inner handlebar clamp, for handlebar Ø from 14.5 to 18.5 mm, upright or suspended mounting possible, SB-packed

with joint made of cast aluminum parts, fastening via inner handlebar clamp, for Handlebar Ø 17.2-22.2 mm, left-hand mounting, self-service packaging, with reminder function (mirror rods lock into the previous position when folded out again)

with joint made of cast aluminum parts, fastening via inner handlebar clamp, for Handlebar Ø 14.5 mm, left-hand mounting, self-service packagingwith reminder function (mirror rods lock into the previous position when folded out again)

with joint made of cast aluminum parts, fastening via inner handlebar clamp, for Handlebar Ø 14.5 mm, left-hand mounting, loosewith reminder function (mirror rods lock into the previous position when folded out again)

SB-packed, mounting on the Handlebar, Plastic mirror arm with integrated clamp fastening, for handlebar diameter 22.2 mm, three locking positions with memory function when parking, for left-hand mounting

"306/1KG", red, length: 10 cm, with adhesive film, for vertical and horizontal mounting, for fast e-bikes requiring license plates

"306/1 GS", red, length: 8,5cm, with adhesive foil, for vertical seat post attachment (angle: approx. 17°), with E-test mark

"313/1" red, small, for mounting on the fender, for long fender

"533", red, plastic body, without mounting screw, 60mm, round, for all trailers

"313/1 K", red, small, universal usable by joint and tension strap, with rubber insert

"313/1 U", red, with plastic holder, suitable for V- / hydraulic- and cantilever-brakes, mounted on the Pletscher plate/ horizontal plug hole

"313/1ZB", red, mini with reflex effect large surfaces-Z-rear reflector, with plastic screw clamp for mounting on the seat post tube, with Z-approval

"313/1ZF", red, with metal bracket for V-brakes, with Z-approvals

"313/3ZPB", red, format 27 x 91mm, for mounting on the carrier with 50mm distance between the screws, incl. mounting screws, with Z-approval

"314/1", red, with approval mark, oval, short plastic fenders attachment

306 GS, white, with adhesive foil, for vertical fork arm attachment (angle: approx. 17°), with E-test mark

313/5 U, with plastic holder, mounted on fork hole

313/5 WF, with metal holder, mounted on fork hole

313/5 K, white, universal fastening with rubber fastening strap and 2 cable ties, for all current tube diameters, reflector adjustable by ball joint

313/5WB, white, with pre-mounted plastic screw clamp (diameter 13-40mm), wide angle reflection

313/5 K-1, white, universal attachment with rubber strap and 1 cable tie, for all common tube diameters, reflector adjustable via ball joint

6V / 3W

SB-packed

6 in workshop package

210 cm, loosely bundled