FALISOMED spiral spring
stainless steel, single
FALISOMED walking stick and helper holder
silver, to carry along a walking stick or helper, adaptable on both sides
set with 2 clamp brackets, 1 bolt with nut to complete 0.333.015/6, for 2 walking sticks or helpers
- Art.-Nr.: 03330164
- Org.-Nr.: 99E/S
FALISOMED cable device
single, as spare part for the units 0.333.001/6 and 0.333.003/2
compl., consisting of spiral spring, ball bearings-bracket and 3-hole rear axle
- Art.-Nr.: 03335015
- Org.-Nr.: 4100
FALISOMED handicap crank "LM"
aluminium, silver
These cranks are for diasabled people, which cannot improve the joint movement. For bike drivers with a shorter leg or with one leg which does not have the whole knee movability. Aluminium, silver, revised construction Mod.12)
! Adjustable to any desired radius of motion by shifting the pedal and shifting the retaining bracket on the crank arm !
FALISOMED handicap crank
This rehabilitation crank is for disabled people, which can improve the joint movement through training. The FalisoMED- Crank - REHA - P are suitable for all bikes, exercise bikes or ergo-bikes. They are made from a high-strength light alloy - which is used by the aircraft industry. The FalisoMED-Crank REHA - P has a slide rail, which its adapter was constructly revised and allows a tight, motion-free connection between the slide rail and serial crank(Mod.12). An adjustable and lockable slide block is mounted to the slide rail which has on the outer side a pedal thread (left or right). The appropriate pedal is screwed in to this thread and can now be adusted in 8 steps and then locked. This model is - because of its cheap price - renounces the very actual ball-stored pendulum crank-construction which is proven since decades, which you can still order when desired (0.333.030/5 + 0.333.031/3). Adapting is very simple. Each crank comes with a detailed assembly instruction.
FALISOMED handicap crank
This rehabilitation crank is for disabled people, which can improve the joint movement through training. The FalisoMED--Pendulum crank is suitable for exercise bikes, bicycles and ergo-bikes. They are made from a high-strength light alloy - which is used by the aircraft industry. Die FalisoMED-REHA-pendulum crank has a slide rail, which adapter was constructly revised and allows a tight, Motion-free connection between the slide rail and serial crank (Mod. 12). This slide rail has a slide block with a ball bearing spindle mounted pendulum crank. The complete slide block is according to the movement radius practically stepless adjust and lockable. Adapting is very simple. Each crank comes with a detailed assembly instruction.
