maximum charging current 3x 2,0 A, suitable for standard-, AGM- SLA- gel- Ca/Ca and Lithium batteries, LiFePO4, for battery capacity up to 40 Ah, automatic switch-off (Lithium), keep-fresh function, automatic battery detection (Blei-Lithium), other: fully insulated crocodile clips.
Charges three batteries simultaneously with different state of charge and technology, fully automatic 10-stage charging control (Lithium 8 stages), adaptive charging algorithm for lead-acid and lithium (LiFePO4) batteries, Force Mode activates deep discharge lead acid batteries, wake up-function for Lithium (LiFePO4) batteries, activates lithium batteries at low residual voltage, easy-to-use, (connect & forget), short circuit and discharge protection, reverse polarity and overheat protection.
Features: EU power plug 1,5m long, 3x crocodile clips each 61cm long and equipped with quick connect plug
Technical data: connection 100-240 V AC, 50-60 Hz, charging voltage 7,2V DC (6V), 14,4V DC (12V), charging current: 2A, lead batteries 6V or 12V, Lithium (LiFePO4) 12V, battery capacity up to 40 Ah, only battery maintenance until 80 Ah.

4-bank battery rescue device and charger for standard, AGM and gel batteries
Battery care center for the correct activation of new batteries and the rescue, charging and testing of neglected batteries with low voltage. Adjustable charging power from 2A - 4A. With automatic desulfation of deeply discharged batteries with a size of 2Ah - 40Ah. Each bank operates independently. The device is short-circuit proof, protected against polarity reversal and against incorrect operation.

NEW mode: 1-hour activation charge only for new batteries filled with acid immediately before charging, such as standard wet batteries with removable caps and dry-charged AGM-MF batteries supplied with a separate acid pack.

2A-/ 4A mode: Max. 12 hours sustained charge mode for diagnostics, rescue, charging, low voltage sulfated battery testing. Suitable for charging all batteries, including factory activated encapsulated AGM batteries (e.g. Yuasa YTZ, GYZ) before sale.

8-bank battery rescue device and charger for standard, AGM, gel and deep cycle batteries
Battery care center for salvage, charging and testing of all 6V and 12V batteries, including neglected, low voltage sulfated batteries. Fully automatic charging and conservation. Each bank operates independently. The battery status is displayed for each battery. Charge current per bank 1A.

The automatic, multi-stage 12 volt charger for the workshop incl. wall bracket. Ideal for 12V standard, AGM and gel batteries from 2Ah - 40Ah rated capacity. The charging circuit automatically detects sulfated batteries and initiates their rescue. It also includes a unique, automatically adjusting program for the vital initial "pick charge" of new encapsulated MF/AGM motorcycle batteries. 6 constant current charge settings from 1Ah - 9Ah and a 4-stage charge program.

Quick activation of new batteries: 30 minutes activation charge only for new batteries filled with acid immediately before charging, such as standard wet batteries with removable caps and dry-charged AGM MF batteries supplied with a separate acid pack.

Charge tester selectable from 15A to 150A: Automatically tests the starting current of the battery up to 330 CCA. A 3 seconds test simulates the normal starting of the engine, a 15 seconds test determines the health status of the battery.

Motorsport specific charging algorithm: 4-stage charge saves any 12V battery. MF mode allows up to 16,9V for dry charged AGM batteries.

Temperature regulated charge: The charging voltage is adapted to the ambient temperature. (-4mV /°C / cell above / below 68°F / 20°C).

Accurate voltage measurement: The charging cables are equipped with integrated voltage sensor wires for accurate voltage measurement at the battery.

User-friendly: The 6-position combination field switch allows selection of the correct test and charge current for the connected battery. TEST and then select the maximum charging time according to the result, press the CHARGE key. The program automatically completes the charge and then checks the battery.

Charging current: 9A maximum, 1, 2, 3, 5, 7, 9 Amp. selection
Test current: 150A max., 15, 35, 50, 70, 100, 150 Amp. selection
Use: rooms / workshop environment (lowest temperature: -4°F / -20°C)
Rescue: start with low voltage of 1V + desulfation rescue with high power
Input: selectable 110 - 120 VAC / 220 - 240 VAC, 50 - 60Hz, with main switch and replaceable fuse
Design: Ventilated industrial desktop enclosure with optional wall mount (TS-218), 6ft / 180cm power cord, and 1 pair of 6ft / 180cm high current draw charging cables with heavy duty battery terminals

Safety: No risk of overcharging, spark suppression, safe for long term battery maintenance, automatic shutdown in case of short circuit or disconnected battery, 2 years warranty.