schneider airsystems Compressor "UNM STH 660-11-180"

Piston compressor, stationary, with horizontal tanks
V-belt-driven 2-cylinder unit with two-stage compression for 11 bar pressure increases performance and ensures high efficiency. Comes standard with all fittings, a solenoid valve or pressure switch with a relief valve for fully automatic operation, engine protection, a safety valve, a Pressure Gauge, a check valve, a condensate discharge valve, and a shut-off valve. Equipped as standard with rubber vibration dampers and a 400 V / 50 Hz electrical connection. For compressors with an 4.1 kW engine, the regulations of the local power utility must be observed. Easily accessible condensate drain located beneath the tank. Also suitable for easy connection of an Ecomat condensate drain. Transport and installation are significantly simplified by mounting the units on a pallet. With two 90-liter tanks, no approval is required due to type testing in accordance with §17 of the Industrial Safety Regulation. No installation inspection or periodic inspections by the TÜV are required. Inspection by a qualified person (expert) is sufficient. Tanks feature a baked-on interior coating and come with a 15-year warranty against through-corrosion.

Technical Specifications:
Suction capacity: 653 l/min
Discharge capacity: 490 l/min
Max. pressure: 11 bar
Tank capacity: 2 × 90 l
Voltage: 400 V / 50 Hz
Motor power: 4.1 kW
RPM: 975
Noise level: 95 dB(A)
Sound power level (LWA): 83 dB(A)
Dimensions (W x D x H): 1200 x 800 x 1200 mm
Weight: 350 kg