SKYRICH LiFePO4 Battery
MTF
- Art.-Nr.: 04605960
- Org.-Nr.: HJTX9-FP
repleaces following batteries: YTX9-BS, YTR9-BS
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
powerful, safe, long service lifeMore than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphate LiFePO4 as cathode material. Possible installation in any position, even overheadspacer, distance piece or foam mats are supplied to match the original size of the battery compartmentindicator, battery status display with 3 LEDs, if only one LED is displayed, the battery should be recharged (please use only chargers suitable for lithium batteries!)
Información sobre el producto
- Altura: 105.0 mm
- Anchura: 87.0 mm
- Artículo: Article
- Atornilladura: M6
- Capacidad 10 h: 3.0 Ah
- Corriente de arranque en frío CCA (EN): 180 A
- Energía: 36.00 Wh
- Longitud: 150.0 mm
- Polo negativo: front right
- Polo positivo: front left
- Purga de aire: without
- Tensión: 12V
- Versión: MTF , ready-to-use
- Ámbito de aplicación: motorcycle
- Número de artículo del proveedor:: HJTX9-FP
- EAN: 6971475470084
- UVP: 78,87 €
- Marca/Proveedor Skyrich
- Unidad de medida: PIECE
| Artículo | Precio | |
|---|---|---|
 TECMATE Battery Monitor for Lithium batteries, SAE connection, 1/4" / M6 eylets
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
| ||
 TECMATE Battery Charger "OptiMATE Lithium 4S 5.0A" charging voltage: 12V
| ||
 TECMATE Battery Charger "OptiMATE Lithium 4S 0.8A" charging voltage: 12V
| ||
 CTEK Battery Charger "Lithium XS" charging voltage: 12V
|
Ejecuciones
| Artículo | Precio | |
|---|---|---|
 SKYRICH LiFePO4 Battery MTF powerful, safe, long service lifeMore than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphate LiFePO4 as cathode material. Possible installation in any position, even overheadspacer, distance piece or foam mats are supplied to match the original size of the battery compartmentindicator, battery status display with 3 LEDs, if only one LED is displayed, the battery should be recharged (please use only chargers suitable for lithium batteries!)
|