YUASA Battery "YTX9 / YTX9-BS"
MTFmaintenance-free
Attach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip firmly into place. Once filled, the battery is sealed and no further maintenance is required.
CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
- Nº de artículo 05407770
- Org.-Nr.: YTX9-BS-CP
ETN: 508 012 008
DIN: 50812
Información sobre el producto
- Altura 105.0 mm
- Anchura 87.0 mm
- Artículo Article
- Atornilladura M6
- Cantidad de llenado 0.4 l
- Capacidad 10 h 8.0 Ah
- Capacidad 20 h 8.4 Ah
- Corriente de arranque en frío CCA (EN) 135 A
- Longitud 150.0 mm
- Polo negativo front right
- Polo positivo front left
- Purga de aire internal
- Tensión 12V
- Versión MTF , with acid pack
- Ámbito de aplicación motorcycle
- Número de artículo del proveedor: YTX9-BS-CP
- EAN: 5050694004483
- UVP: 67,00 €
- Marca/Proveedor YUASA
- Unidad de medida: PIECE
- Gewicht: 3.205 kg
| Artículo | Precio | |
|---|---|---|
 | ||
 | ||
 | ||
 |
| Artículo | Precio | |
|---|---|---|
 MTFmaintenance-freeAttach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip on firmly. Once filled, the battery is sealed and no further maintenance is necessary.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip! Leer más... Weniger lesen
|
Ejecuciones
Con la ayuda del campo de búsqueda, puede refinar la selección de variantes de producto.
| Artículo | Precio | |
|---|---|---|
 MTFmaintenance-free, sealed100 % maintenance-free - no need to top up with water; only regular charging is required when not in use, first-class AGM technology (Absorbed Glass Matt) without free acid, sealed, leak-proof design for different installation positions, high-performance OE battery, developed according to the individual specifications of motorcycle manufacturers, sulphate barrier additive to prevent damage if the charge is too low, supplied filled and ready to install. Leer más... Weniger lesen
| ||
 MTFmaintenance-freeAttach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip firmly into place. Once filled, the battery is sealed and no further maintenance is required.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip! Leer más... Weniger lesen
|