BS-BATTERY Battery "BTX4L-BS"
MTFmaintenance-free, 5 Ah
Attach the supplied acid pack after removing the adhesive strip and allow it to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip on firmly. Once filled, the battery is sealed and no further maintenance is necessary.
CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
- Article number: 05378054
- Original number: 300889
ETN: 503 014 003
DIN: 50314
Product information
- Bleeding: internal
- Capacity 10 Hr: 5.0 Ah
- Capacity 20 Hr: 4.2 Ah
- Cold start current CCA: 55 A
- Design: MTF , with acid pack
- Energy: 51.20 Wh
- Filling quantity: 0.2 l
- Height: 85.0 mm
- Length: 113.0 mm
- Minus pole: front left
- Plus pole: front right
- Range of application: motorcycle
- Screwing: M5
- Type: Article
- Voltage: 12V
- Width: 70.0 mm
- Supplier Article Number:: 300889
- EAN: 3564093008895
- MSRP: €24.23
- Brand/Supplier BS-BATTERY
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 BS-BATTERY Battery Charger "BS60" 12 Volt
| ||
 BS-BATTERY Battery Charger "BS10" 6V/12V
| ||
 BS-BATTERY battery charger "BS30" 12 Volt
| ||
 BS-BATTERY battery charger "BS15" 12 Volt
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
|
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
 BS-BATTERY Battery "BTX4L-BS" MTFmaintenance-free, 5 AhAttach the supplied acid pack after removing the adhesive strip and allow it to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip on firmly. Once filled, the battery is sealed and no further maintenance is necessary.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
| ||
 BS-BATTERY Battery "BTX4L-BS" MTFmaintenance-free, 4.2 AhAttach the supplied acid pack after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip on firmly. Once filled, the battery is sealed and no further maintenance is necessary.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
|