BS-BATTERY Battery "BTZ10S / BTZ10S-BS"
MTFmaintenance-free
Attach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip firmly into place. Once filled, the battery is sealed and no further maintenance is required.
CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
- Article number: 05379904
- Original number: 300696
ETN: 508 901 015
DIN: 508901
Product information
- Bleeding: internal
- Capacity 10 Hr: 8.6 Ah
- Capacity 20 Hr: 9.0 Ah
- Cold start current CCA: 190 A
- Design: MTF , with acid pack
- Energy: 110.00 Wh
- Filling quantity: 0.4 l
- Height: 93.0 mm
- Length: 150.0 mm
- Minus pole: front right
- Plus pole: front left
- Range of application: motorcycle
- Screwing: M6
- Type: Article
- Voltage: 12V
- Width: 88.0 mm
- Supplier Article Number:: 300696
- EAN: 3661453006963
- MSRP: €50.37
- Brand/Supplier BS-BATTERY
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 BS-BATTERY battery charger "BS15" 12 Volt
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
| ||
 BS-BATTERY Battery Charger "BS10" 6V/12V
| ||
 BS-BATTERY battery charger "BS30" 12 Volt
| ||
 BS-BATTERY Battery Charger "BS60" 12 Volt
|
| Article | Price | |
|---|---|---|
 BS-BATTERY Battery "BTZ10S / BTZ10S-BS" SLAsealedOffers all the advantages of a maintenance-free battery, but is already fully charged on delivery and ready for immediate use. Has also been specially developed for horizontal use.
|
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
BS-BATTERY Battery "BTZ10S / BTZ10S-BS" SLAsealedOffers all the advantages of a maintenance-free battery, but is already fully charged on delivery and ready for immediate use. Has also been specially developed for horizontal use.
| ||
 BS-BATTERY Battery "BTZ10S / BTZ10S-BS" MTFmaintenance-freeAttach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip firmly into place. Once filled, the battery is sealed and no further maintenance is required.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
|