BS-BATTERY LiFePO4 Battery "BSLI-10"
MTF
- Article number: 05376934
- Original number: 360118
replaces following lead-acid batteries: YTX20L, YTX20HL, YTX24HL, YTX20L-BS, YTX20HL-BS, YTX24HL-BS, Y50N18L-A, Y50N18L-A2, Y50N18L-A3, Y50N18L-AT
ready-to-use, powerful, safe, long service life, waterproof, low self-discharge, robust brass connections, battery status indicator, possible vertical and horizontal screwing, robust nylon housing, incl. foam adhesive pads to adapt to the existing battery box
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
We recommend to check the battery pole screws every six months for a firm fit and retighten if necessary.
More than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphateLiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
Product information
- Bleeding: without
- Capacity 10 Hr: 7.5 Ah
- Cold start current CCA: 480 A
- Design: MTF , ready-to-use
- Energy: 90.00 Wh
- Height: 105.0 mm
- Length: 148.0 mm
- Main colour: black
- Minus pole: front left
- Plus pole: front right
- Range of application: motorcycle
- Screwing: M6
- Secondary colour: red
- Type: Article
- Voltage: 12V
- Width: 86.0 mm
- Supplier Article Number:: 360118
- EAN: 3564093601188
- MSRP: €274.06
- Brand/Supplier BS-BATTERY
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 TECMATE Battery Charger "OptiMATE Lithium 4S 5.0A" charging voltage: 12V
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
| ||
 TECMATE Battery Charger "OptiMATE Lithium 4S 0.8A" charging voltage: 12V
| ||
 BS-BATTERY battery charger "BS30" 12 Volt
| ||
 TECMATE Battery Monitor for Lithium batteries, SAE connection, 1/4" / M6 eylets
| ||
 CTEK Battery Charger "Lithium XS" charging voltage: 12V
|
Product variants
| Article | Price | |
|---|---|---|
 BS-BATTERY LiFePO4 Battery "BSLI-10" MTF
| ||
 BS-BATTERY LiFePO4 Battery "BSLI-10" Lithium-MAX, MTF, performance optimised We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.More than 2000 charging cycles possible, up to 70 % lighter than lead-acid batteries, fuel-saving, fast charging possible in 6 minutes, environmentally neutral, lithium iron phosphate LiFePO4 as cathode material. Can be installed in any position, even upside down.Battery status display with 6-LED bar, if only three LEDs are displayed, the battery should be recharged. Only use suitable charging devices.More capacity and starting power thanks to enlarged pouch cells, Housing heat-resistant up to +230°C, can be installed in any position, even upside down.
|