BUSCH & MÜLLER rear reflector
"313/1ZB", red, mini with reflex effect large surfaces-Z-rear reflector, with plastic screw clamp for mounting on the seat post tube, with Z-approval
- Article number: 03116571
- Original number: 313/1ZB
Product information
- Attachment: seatpost
- Bidex-Code: 207050
- DST-Code: 2E05
- Design: rear light
- Fedas-Code: 160678
- Main colour: red
- StVZO conform: yes
- Type: Article
- Supplier Article Number:: 313/1ZB
- EAN: 4006021002166
- MSRP: €4.90
- Brand/Supplier Busch + Müller
- Unit of measure: PIECE
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
 "313/1ZB", red, mini with reflex effect large surfaces-Z-rear reflector, with plastic screw clamp for mounting on the seat post tube, with Z-approval
| ||
 "313/1 K", red, small, universal usable by joint and tension strap, with rubber insert
| ||
 "313/3ZPB", red, format 27 x 91mm, for mounting on the carrier with 50mm distance between the screws, incl. mounting screws, with Z-approval
| ||
 "313/1" red, small, for mounting on the fender, for long fender
| ||
 "314/1", red, with approval mark, oval, short plastic fenders attachment
| ||
 "306/1 GS", red, length: 8,5cm, with adhesive foil, for vertical seat post attachment (angle: approx. 17°), with E-test mark
| ||
 "313/1ZF", red, with metal bracket for V-brakes, with Z-approvals
| ||
 "533", red, plastic body, without mounting screw, 60mm, round, for all trailers
| ||
 "313/1 U", red, with plastic holder, suitable for V- / hydraulic- and cantilever-brakes, mounted on the Pletscher plate/ horizontal plug hole
| ||
 "306/1KG", red, length: 10cm, with adhesive foil, for horizontal and vertical attachment, for fast, marking of E-bikes
| ||
 "312Z43PB", red, with Z-test mark, radius 43mm (for flat fender), to be mounted with 15° inclination, with adhesive pad
| ||
 "312Z30PB", red, with Z-test mark, radius 30mm (for strongly curved fender), to be mounted with 15° inclination, with adhesive pad
| ||
 "312ZB0PB", red, with Z-approval marks, for flat mudguards, without horizontal radius (lengthwise 77)to be mounted with 15° inclination, with adhesive pad, in polybag
|