innobike Chain Spray "106 Kettenfluid"

Developed for long-lasting lubricationBehind the properties of the product is a carefully created formula consisting of several components.Ester-based organic solvents with a high dissolving capacity ensure cleaning and rust removal. The solvents also ensure penetration into the tightest of fits.Gradual evaporation of the solvent components results in a dry, non-sticky lubricating film that nevertheless adheres firmly to the surface. Due to the good adhesion, the lubricating film does not spin off, which means a long service life for the lubrication and enables lubrication intervals to be extended considerably.The lubricating film made of specially developed polymers can also withstand high mechanical loads and the non-stick properties prevent dust and dirt from being deposited on the surface. Of course, the tightly closed, very well adhering lubricating film also provides very good corrosion protection.Application instructions - Application interval: 150 - 300 km, depending on the terrain and weather conditions.- Apply after driving. Allow a reaction time of 4-6 hours. 105 High Tech KETTENFLUID works overnight.- Avoid spray mist by using the brushes.- Avoid contacts with brakes of any kind; loss of braking power possible.- 105 High Tech KETTENFLUID infiltrates wetness so that the chains can be used immediately after the bike wash.Application- Apply 105 High Tech KETTENFLUID with Brush Attachment to the rear small Sprocket.- Turn the pedals backwards in freewheel mode and spray continuously until 105 High Tech KETTENFLUID drips from the large bottom bracket sprocket.- Leave to work for 46 hours. During this time, the Cleaner contained in the fluid evaporates and a thin, non-slip lubricating film remains on the Chain.- Application with the capillary tube is ideal for all types of cables, bearings and other moving parts. Removes gumming and dirt. Immediately eliminates stiffness.