Bike-Lift Workstand "Creator"
black
Application: The wheels are mounted using an axle and two plastic washers per side, along with a Starlock cap. Please make sure that the axle is inserted from the outside and the Starlock cap is placed on from the inside. The Starlock washer can be secured with a light tap from a Rubber Hammer.
- Article number: 05764642
- Original number: 901040101100
Left single-arm swingarm, Dimensions (LxWxH): 55 x 68 x 42 cm
Thanks to its modular design, the workstand can be personalized for the customer with a variety of differently colored wheels and color-coordinated to match the specific vehicle.
Please order wheels and vehicle-specific adapters separately.
Product information
- Design motorcycle assembly stands / lifts
- Length 55.0 cm
- Main colour black
- Use swinging arm
- Variant Article
- Width 68.0 cm
- Supplier Article Number: 901040101100
- MSRP: €122.52
- SB-Article No
- Brand/Supplier Bike-Lift
- Unit of measure: PIECE
- product data sheet Bike-Lift Workstand Creator Danish
- product data sheet Bike-Lift Workstand Creator German
- product data sheet Bike-Lift Workstand Creator English
- product data sheet Bike-Lift Workstand Creator Spanish
- product data sheet Bike-Lift Workstand Creator French
- product data sheet Bike-Lift Workstand Creator Italian
- product data sheet Bike-Lift Workstand Creator Dutch
| Article | Price | |
|---|---|---|
![]() 20mm Ø, for Ø 10mm wheel axle Read more Read less
| PU 1 | |
![]() | PU 1 |
| Article | Price | |
|---|---|---|
![]() Ducati, mandrel dimensions: length: 90mm, diameter: 40mm Read more Read less
| PU 1 | |
![]() MV-Agusta, mandrel dimensions: length: 89mm, diameter: 42,2mm Read more Read less
| PU 1 | |
![]() Ducati, mandrel dimensions: length: 58/35mm, diameter: 21,8/25,9mm Read more Read less
| PU 1 | |
![]() mandrel dimensions: length: 155mm, diameter: 53mm Read more Read less
| PU 1 | |
![]() Triumph / KTM, mandrel dimensions: length: 92mm, diameter: 27,5mm Read more Read less
| PU 1 | |
![]() Honda, mandrel dimensions: length: 94mm, diameter: 28,7mm Read more Read less
| PU 1 | |
![]() Honda, mandrel dimensions: length: 95mm, diameter: 28,2mm Read more Read less
| PU 1 | |
![]() Honda, mount mandrel dimensions: length: 120mm, diameter: 18,1mm Read more Read less
| PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 | |
![]() | PU 1 |
Product variants
| Article | Price | |
|---|---|---|
![]() blackApplication: The wheels are mounted using an axle and two plastic washers per side, along with a Starlock cap. Please make sure that the axle is inserted from the outside and the Starlock cap is placed on from the inside. The Starlock washer can be secured with a light tap from a Rubber Hammer. Read more Read less
| PU 1 |





















