for automatic transmission, mixing ratio 1:10
Reliably dissolves and removes resins, oxidized oil residues, operational debris and impurities in the transmission oil circuit. Fundamentally cleans the entire system, reduces noise, ensures safe, smooth transmission and optimizes shifting behaviour.

for the cylinder head thightness tester #4793/3 (6.55 27 32/7)
for the detection of cylinder head gasket defects, leaks between the combustion chamber and the cooling system, for water-cooled combustion engines (gas, diesel, fuel)

Pro Line, active solvent
Loosens and removes all dirty deposits and dirt such as oil, resin, glue, etc., cleans nozzles and internal parts. It guarantees the functional performance of the moving parts and reduces fuel consumption.
Note: Only suitable for use in gasoline engines!

Pro-Line, heavy-duty solvent
For dismantling seized injectors, glow and spark plugs. Undermines accumulated dirt and corrosion and enables easy removal. Removes oil residues, resinfication and encrusted dirt

Pro-Line, active dissolver with additive combination
For cleaning typical contamination and deposits in the intake and throttle valve area. Loosens and removes greasy deposits and dirt such as oil, soot, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of diesel-powered engines.
Attention: Application only with running engine!

for all types of V-belts such as leather, rubber, balata etc., eliminates V-belt slipping and squeaking
Makes them supple and extends the service life. Spares belts and discs from wear. Increases the traction effectiveness. Maintains and protects.
Note: Not suitable for flat belts!

Application: Spray side surfaces of V-belts from approx. 20cm. Repeat if a thicker coating is required. Wait approx. 10 minutes to allow the product to take effect before starting the belt drive

for degreasing and cleaning
For degreasing and cleaning greasy soiling and deposits on e.g. housing, throttle valve, nozzles and holes. Easy to handle (no disassembly reuired), for interior and exterior
Note: Do not spray on painted parts. For painted parts, check for compatibility and color change on a concealed area!

Application: Spray all components which are exposed with the air filter removed and with the engine switched off. Spray external components and allow to dry. Repeat cleaning in extreme cases. Start the engine and allow to run at a moderate speed

for cleaning of sensitive components of the air flow senso
The Cleaner also distinguishes itself through a very fast evaporation. A dirty hot wire or hot plate in the air flow sensor leads to incorrect readings for calculating the fuel/air mixture. An expensive exchange of the sensor can be mostly avoided by the application of aerial masses sensor-cleaner.
Note: Check for compatibility before use on solvent-sensitive plastics, especially on mechanically stressed parts.

Application: Disconnect electrical connection of the air flow sensor and remove the sensor. Spray generously onto dirty components such as the hot wire or hot plate and allow the dirt to drip off. Do not touch the sensitive components of the sensor. Allow the solvent to dry completely before installation. Application is recommended every time the air filter is replaced or when problems arise.

Pro-Line, for use in built-in state
Dissolves hardened, dense and encrusted contaminants on the surface of diesel particulate filters. Secures optimum vehicle handling, engine performance and low fuel consumption. Regular cleaning in combination with flushing can help avoid expensive repair costs.
Note: Cleaning is done with the DPF pressure cup gun #6.60 07 11/3 (7946) and the specially designed DPF lance #4.07 00 83/3 (7945).

Pro-Line, or use after cleaning
The layer of soot is softened by the cleaner, and the soot is dissolved and distributed in the diesel particulate filter so that it can be burned off with normal regeneration. Secures optimum vehicle handling, engine performance and low fuel consumption.
Note: Cleaning is carried out with the DPF pressure cup gun (Art.No. 7946) and the specially developed DPF lance with 5 spray probes (Art.No. 7945).