transmission cleaner for all automatic transmissions and power steering without additional system
dissolves deposits and residues, cleans gentle, do not attack rubber and plastic sealings. 300ml are sufficient for 6 - 9l ATF oil volume

transmission oil additive for manual, power take-off and dofferential gears
High pressure wear protection additive. Reduces friction and wear, reduces shifting forces, increaces smooth running, reduces transmission noise and ensures optimal transmission function. Completely oil-soluble by synthetic additives. Add any time and when changing the transmission oil. Contents sufficient for 2l transmission oil

Note: not suitable for automatic transmissions and motorcycles with wet clutches!

transmission oil additive for all transmission, power take-off and differential gears
Stops oil leak by dripping transmission. Protects clutches from oil fouling and prevents incomplete lubrication and transmission damages that are caused by too low an oil level. Eliminates leaks of shrunk or porous seals and is suitable with commercial transmission oils. Sufficient for up to 1l transmission oil
Note: not suitable for DSG or automatic transmissions or differentials and motorbikes with wet clutches!

for manual, auxiliary and differential tranmsissions
Suitable for use in mineral and synthetic oils. It reduces friction, wear and decreases temperature peaks (smoother run, softer shifting and a nearly wear-free running-in in gear wheels). The gear warms itself up less and wins by smoothing of the dental flanks again in quietness and efficiency.

Note: not suitable for fully automatic transmissions, in oil bath clutches and in motorcycles with wet clutches!

suitable for all automatic transmissions, for 6 - 9l liters of oil
Cleans and frees the ATF circuit of deposits and residues. Provides for optimal shifting performance and prolongs transmission service life.

Application: Before changing the automatic transmission fluid, add the contents of the can to the gear oil when it is at operating temperature through the dipstick opening using a funnel. Allow the engine to run in neutral for approx. 10 minutes and shift through all gears at least twice with the vehicle in a stationary position. Can also be used in all commercial automatic transmission cleaning devices. Always observe the work instructions of the equipment manufacturer!

to test the oil quality during transmission oil change
Automatic transmissions are subject to very high loads and are placed under extreme stress. That is why many automatic transmissions are cooled in the engine's cooling system. No coolant must be allowed to get into the transmission oil, otherwise the transmission will be damaged. The test system indicates if there is water in the oil.

Transmission oil additive for Handlebar and automatic transmissions
Maintains rubber and plastic seals, prevents oil loss, Damper shifting processes, increases service life and minimizes noise. Prevents or eliminates leaks in transmissions caused by hardened or brittle seals. Cleans transmission bores and channels and refreshes the performance of the Oil.

Note: Suitable for Handlebar and automatic transmissions that are filled with ATF II and ATF III oils.

Application: Add additive to the transmission oils via the dipstick. Content (250 ml) is sufficient for up to 8 l oil volume.