Light beige, transparent, low-viscosity corrosion protection for cavities
Water-repellent, temperature-resistant from -25 °C to +160 °C, with good creeping properties. Provides long-lasting protection for body cavities such as sills, pillars, door interiors and headlight housings. Resistant to water, road salt spray, Oil, light acids and alkalis.

wax spray, bitumen-free, PVC-compatible
For the preservation of vehicle bodies and rust-prone areas in the engine compartment. Suitable for repair work. Has a good creeping ability, does not drip and is suitable for long-term protection. Slight spraying of rubber parts gives a dull shine and fresh look

long-term sealing, forms a waxy, olive-brown film
For machinery, vehicles, winter maintenance vehicles, agricultural and construction vehicles, shafts, steel coils, semi-finished and finished products. Forms a compact waxy protective film that does not become brittle, protecting against most environmental, direct weather influences (including flue gas), atmosphere and salt water. Suitable also for protection and insulation of electrical cable lugs and screw terminals. Cab be removed by white spirit or petroleum solvents or "BRUNOX Turbo-Spray" when protection is no longer required

Note: Film thickness min. 20 µm. With a dry film thickness from approx. 50 µm, the best possible corrosion protection is achieved. A wet film thickness of 125 µm gives a dry film thickness of 50 µm. This requires a 0,63 l/m².

aerosol wax polish and corrosion inhibitor
Suitable for the treatment of small, isolated places. Can be applied on layers based on PVC, PVC/wax, rubber/resin or KTL. OEM-specified, temperature resistant and creeping. With the additionally attached spray pipe also the cavities can be well achieved, e.g. in doors and in the engine compartment.

Corrosion protection and lubricants, thixotropic
The product is used for metal products, machines and sports equipment during storage and transportation in a closed environment (up to 3 years), in covered outdoor areas (up to 1 year) and in outdoor areas (up to 5 months). It forms a very even, non-drying corrosion protection film that also penetrates into corners and edges that are difficult to access. It is also resistant to acidic atmospheres and other environmental influences.

Note: The applied layer thickness should be approx. 5 - 20 μm, i.e. 20 - 40 m² of surface can be treated per liter. After protection, it can be cleaned with
detergents, e.g. anionic wetting agents.

sprayable rust inhibitor based on wax, transparent
Firmly adhering, adhesive-free drying, water repellent, temperature resistant till 100°C. To protect folds and surfaces on motor vehicles, construction machinery and gardening equipment. Due to its light color it is particularly suitable for the protection of folds on the hood and in the trunk.

Note: After through-drying, remains a firmly adhering, plastically tough and water-repellent film. The yield point of the dry substance is above 100°C, so that even in the engine compartment there is no risk of run-off or dripping. The dry film has good adhesion to raw and painted sheets. The material is also preferred for preservation of the cleaned engine compartment.

solvent-containing wax with corrosion inhibitor, translucent
For the protection of all cavities in the engine compartment or in doors, pillars, door sills, etc. Can be applied on layers based on PVC, PVC-wax, bitumen/rubber KTL and rubber/resin. Leaves a moisture-repellent film, has a high temperature resistance (up to 120°C) and is also to use in low tempertures (from 10°C).

transparent, salt water resistant, grip and step resistant
Forms a sealed wax film and lastingly protects all metal parts susceptible to corrosion against rust. Ideal for winter storage and the long term protection of stockpiled and inoperative vehicles, machinery and equipment of all types. Can also be used for graffiti protection. Overhead and 360° sprayable

Universal, nylon, with integrated 3-spotlight round nozzle
The probe enables professional spraying in all cavities and gaps.

grey, quick-drying, resistant to water, salt water and light acids and bases
Universal surface coating that permanently seals welding spots and seams. The product acts as corrosion protection when welding between two materials. Also suitable for use in gas shielded arc and spot welding as a spot weld sealer. For applications in the field of bodywork and vehicle construction, metal construction, in welding stores, in shipping, on construction and agricultural machinery as well as in industry and trade.